AD7482:12位3 MSPS SAR ADC_WOSENDONGLI代理AD7482

AD7482:12位3 MSPS SAR ADC

AD7482是一款12位高速、低功耗逐次逼近型ADC,配有一个并行接口,最高呑吐量可达3 MSPS。该器件内置一个低噪声、宽带宽采样-保持放大器,可处理40 MHz以上的输入频率。转换过程是一种专有的逐次逼近算法技术,因此不存在流水线延迟。输入信号采样以及转换启动均在CONVST信号的下降沿进行。转换过程通过内部调整振荡器进行控制。接口则通过标准并行信号线实现,使该器件可与微控制器和DSP直接兼容。AD7482具有出色的交流和直流性能规格。工厂调整技术为高直流精度提供了保障,成就了极低的INL、偏移量和增益误差。该器件采用先进的设计技术,可在高呑吐量的情况下实现极低的功耗。正常工作模式下的功耗为90 mW。提供两种省电模式：一种是睡眠模式,使基准电路保持激活状态,以便快速上电启动,这种模式下的功耗为2.5 mW；另一种是待机模式,功耗仅为10 µW。AD7482采用一个2.5 V的片内基准电压,也可采用2.5 V的外部基准电压源。模拟输入范围为0 V至2.5 V,但通过偏移功能可将输入范围偏置±200 mV,这为用户设置信号范围的底端基准点带来了极大的灵活度,使用单电源运算放大器时也非常有用。另外,AD7482还可通过第13位提供8%的超量程能力。因而,如果模拟输入范围偏离标称值不超过8%,用户仍然可以通过第13位精确表示信号。AD7482的电源电压为4.75 V至5.25 V,同时提供一个VDRIVE引脚,用户可用该引脚设置数字接口线的电平,此VDRIVE引脚的工作电压范围为2.7 V至5.25 V。该器件采用48引脚LQFP封装模式,额定工作温度范围为-40°C至+85°C。

The AD7482 is a 12-bit high speed, low power, successive-approximation ADC. The part operates from a single 5 V power supply and features throughput rates up to 3 MSPS. The part contains a low-noise, wide bandwidth track/hold amplifier that can handle input frequencies in excess of 50 MHz.

The conversion process and data acquisition are controlled by a CONVST signal. Interfacing is via standard signal lines allowing the device to interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CONVST, and conversion is also initiated at this point. There are no pipeline delays associated with the part. The AD7482 uses advanced design techniques to achieve very low power dissipation at high throughput rates. With a +5 V supply and 3 MSPS throughput rate, the AD7482 consumes just 18 mA. Two power saving modes are available on the AD7482: a nap mode that keeps the reference circuitry alive for quick power up times while only consuming 5 mW and a standby mode which reduces power consumption to a mere 5 µW.

The normal analog input range for the part is 0 to 2.5V. However, the AD7482 features a full-scale overrange mode (using a 13th bit) allowing the input signal to accurately resolved up to ±8% of positive or negative full-scale. The AD7482 also allows for system offset removal by providing a user-programmable offset register, which allows offsets as much as ±200 mV to be removed. The AD7482 has an onboard 2.5V reference and also accepts an external reference.

AD7482 特点

高呑吐量：3 MSPS
宽输入带宽：40 MHz
SAR ADC不存在流水线延迟
出色的直流精度性能
两个并行接口模式
低功耗：90 mW（全功率）和2.5 mW（睡眠模式）
待机模式：最大2 µA
欲了解更多信息,请参考数据手册
Fast Throughput Rate: 3 MSPS
Wide Input Bandwidth: 40 MHz
No Pipeline Delays with SAR ADC
Excellent DC Accuracy Performance
Two Parallel Interface Modes
Low Power: 90 mW (Full Power) and 2.5 mW (NAP Mode)
Standby Mode: 2 µA Max
Single 5 V Supply Operation
Internal 2.5 V Reference
Full-Scale Overrange Mode (using 13th Bit)
System Offset Removal via User Access Offset Register
Nominal 0 V to 2.5 V Input with Shifted Range Capability

AD7482 技术指标

Resolution (Bits): 12bit
# Chan: 1
Sample Rate: 3MSPS
Interface: Par
Analog Input Type: SE-Uni
Ain Range: Uni 2.5V
ADC Architecture: SAR
Pkg Type: QFP

AD7482 建议配套产品

Recommended Input Buffer Amplifiers for the AD7482
- For high supply voltages, low distortion, we recommend the AD829 or the ADA4898-1.
- For higher input bandwidth applications, we recommend the AD8021, ADA4899 or the dual AD8022.
Recommended External References for the AD7482
- For precision, high current output, we recommend the AD780 or the ADR431.
Recommended Power Solutions
- For selecting voltage regulator products, use ADIsimPower.
- For selecting supervisor products, use the Supervisor Parametric Search.

AD7482 功能框图

AD7482 芯片订购指南

产品型号	封装	引脚	温度范围	包装和数量	报价*(100-499)	报价*1000 pcs	RoHS
AD7482ASTZ 产品状态: 量产	48 ld LQFP	48	商业	Tray, 250	$ 8.28	$ 7.03	是
AD7482BSTZ 产品状态: 量产	48 ld LQFP	48	商业	Tray, 250	$ 9.93	$ 8.44	是