首页 > ADI 模拟器件公司 > 数据转换器 > ADC 模数转换器

AD7655:  低成本、4通道、1 MSPS 16位PulSAR® ADC

AD7655是一款低成本、4通道、16位、电荷再分配SAR型模数转换器(ADC),采用5 V单电源供电。该器件内置两个低噪声、宽带宽、可同步采样的采样保持放大器、一个1 MSPS 16位高速采样ADC、一个内部转换时钟、纠错电路,以及串行和并行系统接口。每个采样保持放大器都含一个多路复用器,以将4通道输入复用至ADC。

该器件具有两种采样模式:一种是极高采样速率模式(正常模式);一种是低功耗模式(脉冲模式),适用于低功耗应用,其功耗与吞吐量呈比例关系。该器件采用48引脚LQFP或48引脚LFCSP封装,工作温度范围为−40°C至+85°C。

The AD7655 is a low cost four channel 16-bit, charge redistribution SAR, Analog-to-Digital Converter which operates from a single 5 Volt power supply. It contains two low noise, wide bandwidth track/hold amplifiers which allow simultaneous sampling, a high-speed 1 MSPS 16-Bit sampling ADC, an internal conversion clock, error correction circuits, and both serial and parallel system interface ports.Each track/hold has a multiplexer to provide a four-channel ADC.

It features a very high sampling rate mode (Normal) and, for low power applications, a reduced power mode (Impulse) where the power is scaled with the throughput. It is available in a 48-lead LQFP or a 48-lead LFCSP with operation specified from –40°C to +85°C.

AD7655 特点
AD7655 技术指标
AD7655 建议配套产品
AD7655 功能框图

AD7655 芯片订购指南
产品型号 产品状态 封装 引脚 温度范围
AD7655ACP 量产 48 ld LFCSP 7x7mm (5.25EP) 48 工业
AD7655ACPZ 量产 48 ld LFCSP 7x7mm (5.25EP) 48 工业
AD7655ACPZRL 量产 48 ld LFCSP 7x7mm (5.25EP) 48 工业
AD7655ASTZ 量产 48 ld LQFP 48 工业
AD7655ASTZRL 量产 48 ld LQFP 48 工业
EVAL-AD7655CBZ 量产 评估板 - 工业
AD7655 应用技术支持与电子电路设计开发资源下载
  1. AD7655 数据手册DataSheet下载 .PDF
  2. Analog Devices, Inc.ADI 美国模拟器件公司产品订购手册 .PDF
  3. ADC模数转换器选型指南 . PDF