SN65HVD51 高输出全双工 RS 485 驱动器和接收器
The SN65HVD5X devices are 3-state differential line drivers and differential-input line receivers that operate with a 5-V power supply. Each driver and receiver has separate input and output pins for full-duplex bus communication designs. They are designed for balanced transmission lines and interoperation with ANSI TIA/EIA-485A, TIA/EIA-422-B, ITU-T v.11 and ISO 8482:1993 standard-compliant devices.
The SN65HVD50, SN65HVD51, and SN65HVD52 are fully enabled with no external enabling pins.
The SN65HVD53, SN65HVD54, and SN65HVD55 have active-high driver enables and active-low receiver enables. A low, less than 1 uA, standby current is achieved by disabling both the driver and receiver.
All devices are characterized for operation from –40°C to 85°C
| SN65HVD51 | |
| Drivers Per Package | 1 |
| Receivers Per Package | 1 |
| Supply Voltage(s)(V) | 5 |
| ESD(kV) | 16 |
| Temp Range(C) | -40 to 85 |
| Signaling Rate(Mbps) | 25 |
| ICC(Max)(mA) | 2.7 |
| Fail Safe | Idle, Open, Short |
| Isolated | No |
| # of TX/RX | 1 TX / 1 RX |
| Common Mode Range | -7 to 12 |
| Number of Nodes | 64 |
| Duplex | Full |
| Footprint | SN75179 |
| Pin/Package | 8SOIC |
| Rating | Catalog |
| Fault Protection(V) | -9 to 14 |
SN65HVD51 特性
- 1/8 Unit-Load Option Available (Up to 256 Nodes on the Bus)
- Bus-Pin ESD Protection Exceeds 15 kV HBM
- Optional Driver Output Transition Times for Signaling Rates(1) of 1 Mbps, 5 Mbps and 26 Mbps
- Low-Current Standby Mode: < 1 uA
- Glitch-Free Power-Up and Power-Down Protection for Hot-Plugging Applications
- 5-V Tolerant Inputs
- Bus Idle, Open, and Short Circuit Failsafe
- Driver Current Limiting and Thermal Shutdown
- Designed for RS-422 and RS-485 Networks
- 5-V Devices available, SN65HVD51-55
- APPLICATIONS
- Utility Meters
- DTE/DCE Interfaces
- Industrial, Process, and Building Automation
- Point-of-Sale (POS) Terminals and Networks
SN65HVD51 芯片订购指南
| 器件 | 状态 | 温度 | 价格 | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| SN65HVD51D | ACTIVE | -40 to 85 | 2.05 | 1ku | SOIC (D) | 8 | 75 | TUBE | |
| SN65HVD51DG4 | ACTIVE | -40 to 85 | 2.05 | 1ku | SOIC (D) | 8 | 75 | TUBE | |
| SN65HVD51DR | ACTIVE | -40 to 85 | 1.70 | 1ku | SOIC (D) | 8 | 2500 | LARGE T&R | |
| SN65HVD51DRG4 | ACTIVE | -40 to 85 | 1.70 | 1ku | SOIC (D) | 8 | 2500 | LARGE T&R |
SN65HVD51 质量与无铅数据
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| SN65HVD51D | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN65HVD51D | SN65HVD51D |
| SN65HVD51DG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN65HVD51DG4 | SN65HVD51DG4 |
| SN65HVD51DR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN65HVD51DR | SN65HVD51DR |
| SN65HVD51DRG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN65HVD51DRG4 | SN65HVD51DRG4 |
SN65HVD51 应用技术支持与电子电路设计开发资源下载
- SN65HVD51 数据资料 dataSheet 下载.PDF
- TI 德州仪器RS-485选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
SN65HVD51 工具和软件
| 培训内容 | 型号 | 软件/工具类型 |
| SN65HVD51 评估模块 | SN65HVD51EVM | 开发电路板/EVM |