This octal bus transceiver is designed for 2.7-V to 3.6-V VCC operation.
The SN74LVCZ245A is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in a mixed 3.3-V/5-V system environment.
When VCC is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1
| SN74LVCZ245A | |
| Voltage Nodes(V) | 3.3, 2.7 | 
| Vcc range(V) | 2.7 to 3.6 | 
| Input Level | TTL/CMOS | 
| Output Level | LVTTL | 
| Bus Drive(ma) | -24/24 | 
| No. of Outputs | 8 | 
| No. of Bits | 8 | 
| Logic | True | 
| Static Current | 0.1 | 
| tpd max(ns) | 6.3 | 
| Rating | Catalog | 
| Technology Family | LVC | 
| 器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 | 
| SN74LVCZ245ADW | ACTIVE | -40 to 85 | 0.60 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
| SN74LVCZ245ADWE4 | ACTIVE | -40 to 85 | 0.60 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
| SN74LVCZ245ADWG4 | ACTIVE | -40 to 85 | 0.60 | 1ku | SOIC (DW) | 20 | 25 | TUBE | 
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 | 
| SN74LVCZ245ADW | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVCZ245ADW | SN74LVCZ245ADW | 
| SN74LVCZ245ADWE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVCZ245ADWE4 | SN74LVCZ245ADWE4 | 
| SN74LVCZ245ADWG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVCZ245ADWG4 | SN74LVCZ245ADWG4 |