SN74BCT25642 描述This 25-
octal bus transceiver is   designed for asynchronous communication between data buses. The device transmits   data from the A bus to the B bus or from the B bus to the A bus depending upon   the level at the direction-control (DIR) input. The output-enable (
) input can be   used to disable the device so the buses are effectively isolated.
The SN74BCT25642 is capable of sinking 188-mA IOL (A port), which   facilitates switching 25-
 transmission lines on the   incident wave. It is designed specifically to improve both the performance and   density of 3-state memory address drivers, clock drivers, and bus-oriented   transceivers. The distributed VCC and GND pins minimize the noise   generated by the simultaneous switching of the outputs
| SN74BCT25642 | |
| Voltage Nodes(V) | 5 | 
| Rating | Catalog | 
| Technology Family | BCT | 
| 器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 | 
| SN74BCT25642DW | ACTIVE | -40 to 85 | 1.15 | 1ku | SOIC(DW) | 24 | 25 | TUBE | |
| SN74BCT25642DWE4 | ACTIVE | -40 to 85 | 1.15 | 1ku | SOIC(DW) | 24 | 25 | TUBE | |
| SN74BCT25642DWG4 | ACTIVE | -40 to 85 | 1.15 | 1ku | SOIC(DW) | 24 | 25 | TUBE | 
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 | 
| SN74BCT25642DW | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74BCT25642DW | SN74BCT25642DW | 
| SN74BCT25642DWE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74BCT25642DWE4 | SN74BCT25642DWE4 | 
| SN74BCT25642DWG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74BCT25642DWG4 | SN74BCT25642DWG4 |