SN74AHCT244 描述These octal buffers/drivers are designed specifically to improve both the performance and density of 3-state memory-address drivers, clock drivers, and bus-oriented receivers and transmitters.
The ’AHCT244 devices are organized as two 4-bit buffers/line drivers with separate output-enable (OE)\ inputs. When OE\ is low, the device passes data from the A inputs to the Y outputs. When OE\ is high, the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver
| SN54AHCT244 | SN74AHCT244 | |
| Voltage Nodes(V) | 5 | 5 | 
| Vcc range(V) | 4.5 to 5.5 | 4.5 to 5.5 | 
| Logic | True | True | 
| Input Level | TTL | TTL | 
| Output Level | CMOS | CMOS | 
| Output Drive(mA) | -8/8 | -8/8 | 
| No. of Outputs | 8 | 8 | 
| tpd max(ns) | 9.5 | 9.5 | 
| Static Current | 0.04 | 0.04 | 
| Rating | Military | Catalog | 
| Technology Family | AHCT | AHCT | 
| 器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 | 
| SN74AHCT244DW | ACTIVE | -40 to 85 | 0.28 | 1ku | SOIC (DW) | 20 | 25 | TUBE | AHCT244 | 
| SN74AHCT244DWE4 | ACTIVE | -40 to 85 | 0.28 | 1ku | SOIC (DW) | 20 | 25 | TUBE | AHCT244 | 
| SN74AHCT244DWG4 | ACTIVE | -40 to 85 | 0.28 | 1ku | SOIC (DW) | 20 | 25 | TUBE | AHCT244 | 
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 | 
| SN74AHCT244DW | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74AHCT244DW | SN74AHCT244DW | 
| SN74AHCT244DWE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74AHCT244DWE4 | SN74AHCT244DWE4 | 
| SN74AHCT244DWG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74AHCT244DWG4 | SN74AHCT244DWG4 |