ISO1176T 具有集成变压器驱动器的隔离式 ProfiBus 收发器
The ISO1176T is an isolated differential line transceiver with integrated oscillator outputs that provide the primary voltage for an isolation transformer. The device is ideal for long transmission lines because the ground loop is broken to allow the device to operate with a much larger common-mode voltage range. The symmetrical isolation barrier of each device is tested to provide 4242VPK of isolation per VDE for 60 seconds between the line transceiver and the logic-level interface.
The galvanically isolated differential bus transceiver is an integrated circuit designed for bi-directional data communication on multipoint bus-transmission lines. The transceiver combines a galvanically isolated differential line driver and differential input line receiver
|
ISO1176T |
ISO3086T |
ISO35T |
| Supply Voltage(s)(V) |
RS-485 |
RS-485 |
RS-485 |
| Datarate(Mbps) |
2500 |
2500 |
2500 |
| TTL/CMOS Input Threshold |
5 |
5 |
3.3 |
| Rating |
40 |
20 |
1 |
| Fault Protection(V) |
TTL |
TTL |
TTL |
| Isolated |
16 SOIC |
16 SOIC |
16 SOIC |
| Operating Temperature Range(°C) |
Catalog |
Catalog |
Catalog |
| Approx. Price (US$) |
-9 to 14 |
-9 to 14 |
-9 to 14 |
| Duplex |
Yes |
Yes |
Yes |
| Number of Nodes |
-40 to 85 |
-40 to 85 |
-40 to 85 |
| Fail Safe |
3.30 | 1ku |
|
3.25 | 1ku |
| Signaling Rate(Mbps) |
Half |
Full |
Full |
| ESD(kV) |
256 |
256 |
256 |
| Pin/Package |
Idle,Open,Short |
Idle, Open, Short |
Idle,Open,Short |
| ICC(Max)(mA) |
10 |
11 |
16 |
| Receivers Per Package |
16SOIC |
16SOIC |
16SOIC |
| # of TX/RX |
|
|
27 |
| VCC(Min)(V) |
1 TX / 1 RX |
1 TX / 1 RX |
1 TX / 1 RX |
| VCC(Max)(V) |
4.75 |
4.5 |
3 |
| Drivers Per Package |
5.25 |
5.5 |
3.6 |
| Thermal Shutdown |
Yes |
Yes |
Yes |
ISO1176T 特性
- 3000VRMS / 4242VPK Isolation
- Meets or Exceeds the Requirements of EN 50170 and TIA/EIA RS-485
- Signaling Rates up to 40 Mbps
- Easy Isolated Power Design with Integrated Transformer Driver
- Typical Efficiency > 60% (ILOAD = 100 mA) - see sluu471
- Differential Output exceeds 2.1V (54Ω Load)
- Low Bus Capacitance 10pF (MAX)
- 50kV/us Typical Transient Immunity
- UL 1577, IEC 60747-5-2 (VDE 0884, Rev. 2) Approvals Pending
- Fail-safe Receiver for Bus Open, Short, or Idle
- APPLICATIONS
- Profibus
- Factory Automation
- Networked Sensors
- Motor/motion Control
- HVAC and Building Automation Networks
- Networked Security Stations
ISO1176T 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| ISO1176TDW |
ACTIVE |
-40 to 85 |
3.65 | 1ku |
SOIC (DW) | 16 |
40 | TUBE |
ISO1176T |
| ISO1176TDWR |
ACTIVE |
-40 to 85 |
3.30 | 1ku |
SOIC (DW) | 16 |
2000 | LARGE T&R |
ISO1176T |
ISO1176T 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| ISO1176TDW |
Green (RoHS & no Sb/Br) |
Call TI |
Level-2-260C-1 YEAR |
ISO1176TDW |
ISO1176TDW |
| ISO1176TDWR |
Green (RoHS & no Sb/Br) |
Call TI |
Level-2-260C-1 YEAR |
ISO1176TDWR |
ISO1176TDWR |
ISO1176T 应用技术支持与电子电路设计开发资源下载
- ISO1176T 数据资料 dataSheet 下载.PDF
- TI 德州仪器隔离器选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
ISO1176T 工具和软件