AM26LV31E-EP 增强型产品低电压高速四路差动线路驱动器,具有 +/-15-kV IEC ESD 保护
              
The AM26LV31E-EP is a quadruple differential line driver with 3-state outputs.   This driver has ±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV   ESD (IEC61000-4-2, Contact Discharge) protection. This device is designed to   meet TIA/EIA-422-B and ITU Recommendation V.11 drivers with reduced supply   voltage.
              The device is optimized for balanced-bus transmission at switching rates up   to 32 MHz. The outputs have high current capability for driving balanced lines,   such as twisted-pair transmission lines, and provide a high impedance in the   power-off condition.
              The AM26LV31E-EPI is characterized for operation from –40°C to 85°C
              
                
                   | 
                  AM26LV31E-EP | 
                
                
                  | Drivers Per Package | 
                  4   | 
                
                
                  | Supply Voltage(s)(V) | 
                  3.3   | 
                
                
                  | Supply Voltage(s)(Min)(V) | 
                  3   | 
                
                
                  | Supply Voltage(s)(Max)(V) | 
                  3.6   | 
                
                
                  | ESD(kV) | 
                  15   | 
                
                
                  | Signaling Rate(Mbps) | 
                  32   | 
                
                
                  | ICC(Max)(mA) | 
                  0.1   | 
                
                
                  | Temp Range(C) | 
                  -55 to 105   | 
                
                
                  | Rating | 
                  HiRel Enhanced Product   | 
                
                
                  | Operating Temperature Range(C) | 
                  -55 to 105   | 
                
                
                  | # of TX/RX | 
                  4 TX / 0 RX   | 
                
                
                  | Pin/Package | 
                  16SOIC | 
                
              
              AM26LV31E-EP 特性
              
                - Meets or Exceeds Standards TIA/EIA-422-B and ITU Recommendation V.11   
                
 - Operates From a Single 3.3-V Power Supply   
                
 - ESD Protection for RS422 Bus Pins
                  
                      - ±15-kV Human-Body Model (HBM)   
                      
 - ±8-kV IEC61000-4-2, Contact Discharge   
                      
 - ±15-kV IEC61000-4-2, Air-Gap Discharge
 
                  
                 - Switching Rates up to 32 MHz   
                
 - Propagation Delay Time . . . 8 ns Typ   
                
 - Pulse Skew Time . . . 500 ps Typ   
                
 - High Output-Drive Current . . . ±30 mA   
                
 - Controlled Rise and Fall Times . . . 5 ns Typ   
                
 - Differential Output Voltage With 100-
 
                  Load . . .   2.6 V Typ   
                 - Accepts 5-V Logic Inputs With 3.3-V Supply   
                
 - Ioff Supports Partial-Power-Down Mode Operation   
                
 - Driver Output Short-Protection Circuit   
                
 - Glitch-Free Power-Up/Power-Down Protection   
                
 - SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
                  
                      - Controlled Baseline   
                      
 - One Assembly/Test Site   
                      
 - One Fabrication Site
 
                  
                 
              
              AM26LV31E-EP 芯片订购指南
              
                
                  | 器件 | 
                  状态 | 
                  温度 | 
                  价格 | 
                  封装 | 引脚 | 
                  封装数量 | 封装载体 | 
                  丝印标记 | 
                
                
                  | AM26LV31ESDREP | 
                  ACTIVE | 
                  -55 to 105 | 
                  1.86 | 100u | 
                  SOIC (D) |   16 | 
                  2500 | LARGE T&R | 
                    | 
                
                
                  | V62/09603-01XE | 
                  ACTIVE | 
                  -55 to 105 | 
                  1.86 | 100u | 
                  SOIC (D) |   16 | 
                  2500 | LARGE T&R | 
                    | 
                
              
              AM26LV31E-EP 质量与无铅数据
              
                
                  | 器件 | 
                  环保计划* | 
                  铅/焊球涂层 | 
                  MSL 等级/回流焊峰 | 
                  环保信息与无铅 (Pb-free) | 
                  DPPM / MTBF / FIT 率 | 
                
                
                  | AM26LV31ESDREP | 
                  Green (RoHS & no Sb/Br)  | 
                  CU NIPDAU  | 
                  Level-1-260C-UNLIM | 
                  AM26LV31ESDREP | 
                  AM26LV31ESDREP | 
                
                
                  | V62/09603-01XE | 
                  Green (RoHS & no Sb/Br)  | 
                  CU NIPDAU  | 
                  Level-1-260C-UNLIM | 
                  V62/09603-01XE | 
                  V62/09603-01XE | 
                
              
              AM26LV31E-EP 应用技术支持与电子电路设计开发资源下载
              
                - AM26LV31E-EP 数据资料   dataSheet 下载.PDF 
 
                - TI 德州仪器RS-422选型与价格 . xls 
 
                - 所选封装材料的热学和电学性质  (PDF  645 KB)
 
                - 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
 
                - 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
 
                - 接口选择指南 (Rev. D)  (PDF  2994 KB)
 
                - Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
 
                - Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
 
                - Isolated RS-485 Reference Design  (PDF  80 KB)
 
                - 无铅组件涂层的保存期评估  (PDF  1305 KB)
 
                - Analog Signal Chain Guide (8.62 MB)
 
                - Industrial Interface IC Solutions (101 KB)