XIO2213B 1 个 PCIe 至 1394b OHCI 主机控制器
The TI XIO2213B is a PCIe to PCI translation bridge, where the PCI bus interface is internally connected to a 1394b open host controller/link-layer controller with a 3-port 1394b PHY. The PCIe to PCI translation bridge is fully compatible with the PCI Express to PCI/PCI-X Bridge Specification, Revision 1.0. Also, the bridge supports the standard PCI-to-PCI bridge programming model. The 1394b OHCI controller function is fully compatible with IEEE Std 1394b and the latest 1394 Open Host Controller Interface (OHCI) Specification.
The XIO2213B simultaneously supports up to four posted write transactions, four nonposted transactions, and four completion transactions pending in each direction at any time. Each posted write data queue and completion data queue can store up to 8K bytes of data
|
XIO2213B |
| Speed(Max)(Mbps) |
800 |
| FIFO(kb) |
8 |
| Pin/Package |
167NFBGA, 168NFBGA |
| Operating Temperature Range(°C) |
0 to 70 |
| Rating |
Catalog |
XIO2213B 特性
- Full ×1 PCI ExpressTM (PCIe) Throughput
- Fully Compliant With PCI Express Base
Specification, Revision 1.1
- Utilizes 100-MHz Differential PCI Express Common Reference
Clock or 125-MHz Single-Ended Reference Clock
- Fully Supports Provisions of IEEE Std P1394b-2002
- Fully Compliant With Provisions of IEEE Std 1394-1995
for a High-Performance Serial Bus and IEEE Std 1394a-2000
- Fully Compliant With 1394 Open Host Controller Interface (OHCI)
Specification, Revision 1.1 and Revision 1.2 Draft
- Three IEEE Std 1394b Fully Compliant Cable Ports at
100M Bit/s, 200M Bit/s, 400M Bit/s, and 800M Bit/s
- Cable Ports Monitor Line Conditions for Active
Connection to Remote Node
- Cable Power Presence Monitoring
- EEPROM Configuration Support to Load
Global Unique ID for 1394 Fabric
- Support for D1, D2, D3hot
- Active-State Link Power Management Saves Power When
Packet Activity on the PCI Express Link Is Idle,
Using Both L0s and L1 States
- Eight 3.3-V Multifunction General-Purpose I/O
(GPIO) Terminals
XIO2213B 芯片订购指南
| 器件 |
状态 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| XIO2213BZAJ |
ACTIVE |
5.75 | 1ku |
NFBGA (ZAJ) | 168 |
260 | JEDEC TRAY (10+1) |
|
| XIO2213BZAY |
ACTIVE |
5.75 | 1ku |
NFBGA (ZAY) | 167 |
160 | JEDEC TRAY (5+1) |
|
XIO2213B 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| XIO2213BZAJ |
Green (RoHS & no Sb/Br) |
SNAGCU |
Level-3-260C-168 HR |
XIO2213BZAJ |
XIO2213BZAJ |
| XIO2213BZAY |
Green (RoHS & no Sb/Br) |
SNAGCU |
Level-3-260C-168 HR |
XIO2213BZAY |
XIO2213BZAY |
XIO2213B 应用技术支持与电子电路设计开发资源下载
- XIO2213B 数据资料 dataSheet 下载.PDF
- TI 德州仪器1394 集成器件产品选型与价格 . xls
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)