TUSB2136 具有通用 8052 微控制器的通用串行总线复合集线器
The TUSB2136 is an integrated universal serial bus (USB) hub with a general-purpose 8052 microcontroller that can be used for various USB controller applications. The TUSB2136 has 8K × 8 RAM space for application development. Using a 12-MHz crystal, the onboard oscillator generates the internal system clocks. No additional programming is required for any part of the hub functions. The device is programmed via an inter-IC (I2C) serial interface at power on from an EEPROM, or optionally, the application firmware can be downloaded from a host PC via USB. The 8052-based microprocessor allows several third-party standard tools to be used for application development. In addition, the application code available in the general market can also be used (this may or may not require some code modification due to hardware variations).
|
TUSB2136 |
Supply Voltage(s)(V) |
3.3 |
Operating Temperature Range(C) |
0 to 70 |
Pin/Package |
64LQFP |
USB Speed |
Full |
Integrated MCU Architecture |
8052 |
TUSB2136 特性
- Multiproduct support with one code and one chip (up to 16 products with one chip)
- Fully compliant with the USB specification as a compound full-speed device: TID #30270119
- Supports 1.5 and 12 Mbits/s USB data rates
- Supports USB suspend/resume and remote wake-up operation
- Integrated two-port hub with individual power management per port
- Integrated 8052 microcontroller with:
- 256 × 8 RAM for internal data
- 8K × 8 RAM code space available for downloadable firmware from host or I2C port.
- 512 × 8 shared RAM used for data buffers and endpoint descriptor blocks (EDB) [1]
- Four 8052 GPIO ports (port 0, 1, 2 and 3)
- Master I2C controller for external slave device access
- Watchdog timer
- Operates from a 12-MHz crystal
- On-chip PLL generates 48 MHz
- Supports a total of three input and three output (interrupt, bulk) endpoints
- Power-down mode
- 64-pin TQFP package
TUSB2136 芯片订购指南
器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
TUSB2136PM |
ACTIVE |
0 to 70 |
4.10 | 1ku |
LQFP (PM) | 64 |
160 | JEDEC TRAY (10+1) |
|
TUSB2136PMG4 |
ACTIVE |
0 to 70 |
4.10 | 1ku |
LQFP (PM) | 64 |
160 | JEDEC TRAY (10+1) |
|
TUSB2136 质量与无铅数据
器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
TUSB2136PM |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TUSB2136PM |
TUSB2136PM |
TUSB2136PMG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TUSB2136PMG4 |
TUSB2136PMG4 |
TUSB2136 应用技术支持与电子电路设计开发资源下载
- TUSB2136 数据资料 dataSheet 下载.PDF
- TI 德州仪器USB选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 高性能SERDES及其在CPRI 接口的应用分析 (zhca076.HTM, 8 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
TUSB2136 工具和软件