TSB83AA22C IEEE 标准 1394b-2002 PHY 和 OHCI 链路器件

The TSB83AA22C is an IEEE Std 1394b-2002 link-layer design and physical layer (PHY) design combined in a single package to meet the demanding requirements of today’s 1394 bus applications. The TSB83AA22C device is capable of exceptional 800-Mbps performance; thus, providing the throughput and bandwidth to move data efficiently and quickly between the PCI and 1394 buses. The TSB83AA22C device also provides outstanding ultralow power operation and intelligent power-management capabilities. The device provides the IEEE 1394 LLC function and PHY function and is compatible with 100-Mbps, 200-Mbps, 400-Mbps, and 800-Mbps serial-bus data rates.

The TSB83AA22C operates as the interface between 33-MHz/32-bit PCI local bus and an IEEE Std 1394a-2000 or IEEE Std 1394b-2002 serial-bus interface

	TSB83AA22C
Speed(Max)(Mbps)	800
FIFO(kb)	9
Pin/Package	168NFBGA
Rating	Catalog

TSB83AA22C 特性

• Fully Supports Provisions of IEEE Std 1394b-2002 Revision 1.33+ at 1-Gigabit Signaling Rates
• Fully Supports Provisions of IEEE Std 1394a-2000 and IEEE Std 1394-1995 for High-Performance Serial Bus
• Fully Interoperable With FirewireTM, i.LINKTM, and SB1394 Implementations of IEEE Std 1394
• Provides Two Fully Backward-Compatible, (IEEE Std 1394a-2000 Fully Compliant) Bilingual IEEE Std 1394b-2002 Cable Ports at up to 800 Megabits per Second (Mbps)
• Full IEEE Std 1394a-2000 Support Includes:
  • Connection Debounce
  • Arbitrated Short Reset
  • Multispeed Concatenation
  • Arbitration Acceleration
  • Fly-By Concatenation
  • Port Disable/Suspend/Resume
• Extended Resume Signaling for Compatibility With Legacy DV Devices
• Power-Down Features to Conserve Energy in Battery-Powered Applications
• Low-Power Sleep Mode
• Fully Compliant With Open Host Controller Interface (OHCI) Requirements
• Cable Power Presence Monitoring
• Cable Ports Monitor Line Conditions for Active Connection to Remote Node
• Register Bits Give Software Control of Contender Bit, Power-Class Bits, Link Active Control Bit, and IEEE Std 1394a-2000 Features
• Interoperable With Other 1394 Physical Layers (PHYs) Using 1.8-V, 3.3-V, and 5-V Supplies
• Low-Jitter, External Crystal Oscillator Provides Transmit and Receive Data at 100/200/400/800 Mbps and Link-Layer Controller Clock at 49.152 MHz and 98.304 MHz

TSB83AA22C 芯片订购指南

器件	状态	价格	封装 | 引脚	封装数量 | 封装载体	丝印标记
TSB83AA22CZAJ	ACTIVE	8.50 | 1ku	NFBGA (ZAJ) | 168	260 | JEDEC TRAY (10+1)

TSB83AA22C 质量与无铅数据

器件	环保计划*	铅/焊球涂层	MSL 等级/回流焊峰	环保信息与无铅 (Pb-free)	DPPM / MTBF / FIT 率
TSB83AA22CZAJ	Pb-Free (RoHS)	SNAGCU	Level-3-260C-168 HR	TSB83AA22CZAJ	TSB83AA22CZAJ

TSB83AA22C 应用技术支持与电子电路设计开发资源下载

1. TSB83AA22C 数据资料 dataSheet 下载.PDF
2. TI 德州仪器1394 集成器件产品选型与价格 . xls
3. Analog Signal Chain Guide (8.62 MB)
4. Industrial Interface IC Solutions (101 KB)