TPS3808G18-Q1 汽车类低静态电流可编程延迟监控电路

	TPS3808G18-Q1
No. of Supervisors	1
Vit1(Typ)(V)	Adj
Reset Threshold Accuracy(%)	0.5
Time Delay(ms)	Prog
IDD(Typ)(uA)	2.4
Pin/Package	6SOT-23
Rating	Automotive

TPS3808G18-Q1 描述

The TPS3808 microprocessor supervisory circuits monitor system voltages from 0.4 V to 5 V, asserting an open-drain RESET signal when the SENSE voltage drops below a preset threshold or when the manual reset (MR) pin drops to a logic low. The RESET output remains low for the user-adjustable delay time after the SENSE voltage and MR return above their thresholds. The TPS3808 uses a precision reference to achieve 0.5% threshold accuracy for VIT ≤ 3.3 V. The reset delay time can be set to 20 ms by disconnecting the CT pin, 300 ms by connecting the CT pin to VDD using a resistor, or can be user adjusted between 1.25 ms and 10 s by connecting the CT pin to an external capacitor.

TPS3808G18-Q1 特性

Qualified for Automotive Applications
Power-On Reset Generator With Adjustable Delay Time: 1.25 ms to 10 s
Very Low Quiescent Current: 2.4 uA Typ
High Threshold Accuracy: 0.5% Typ
Fixed Threshold Voltages for Standard Voltage Rails From 1.2 V to 5 V and Adjustable Voltage Down to 0.4 V Are Available
Manual Reset (MR) Input
Open-Drain RESET Output
Temperature Range: –40°C to 125°C
Small SOT-23 Package
APPLICATIONS
- DSP or Microcontroller Applications
- Notebook/Desktop Computers
- PDAs/Hand-Held Products
- Portable/Battery-Powered Products
- FPGA/ASIC Applications

TPS3808G18-Q1 芯片订购指南

器件	状态	温度 (oC)	价格（美元）	封装 \| 引脚	封装数量 \| 封装载体	丝印标记
TPS3808G18QDBVRQ1	ACTIVE	-40 to 125	0.85 \| 1ku	SOT-23 (DBV) \| 6	3000 \| LARGE T&R	BAZ

TPS3808G18-Q1 质量与无铅数据

器件	环保计划*	铅/焊球涂层	MSL 等级/回流焊峰	环保信息与无铅 (Pb-free)	DPPM / MTBF / FIT 率
TPS3808G18QDBVRQ1	Green (RoHS & no Sb/Br)	CU NIPDAU	Level-1-260C-UNLIM	TPS3808G18QDBVRQ1	TPS3808G18QDBVRQ1