| TLV2553-Q1 | |
| Resolution(Bits) | 12 |
| Sample Rate (max) | 200kSPS |
| Architecture | SAR |
| Power Consumption(Typ)(mW) | 2.43 |
| DNL(Max)(+/-LSB) | 1 |
| INL(Max)(+/-LSB) | 1 |
| No Missing Codes(Bits) | 12 |
| No. of Supplies | 1 |
| Analog Voltage AV/DD(Min)(V) | 2.7 |
| Analog Voltage AV/DD(Max)(V) | 5.5 |
| Logic Voltage DV/DD(Min)(V) | 2.7 |
| Logic Voltage DV/DD(Max)(V) | 5.5 |
| Input Configuration Range | Vref |
| Reference Mode | Ext |
| Rating | Automotive |
| Pin/Package | 20SOIC |
| # Input Channels | 11 |
| Operating Temp Range(Celsius) | -40 to 125 |
The TLV2553 is a 12-bit switched-capacitor successive-approximation analog-to-digital converter (ADC). The ADC has three control inputs [chip select (CS), the input-output clock, and the address/control input (DATAIN)] designed for communication with the serial port of a host processor or peripheral through a serial 3-state output.
In addition to the high-speed converter and versatile control capability, the device has an on-chip 14-channel multiplexer that can select any one of 11 inputs or any one of three internal self-test voltages using configuration register 1. The sample-and-hold function is automatic. At the end of conversion, when programmed as EOC, the pin 19 output goes high to indicate that conversion is complete. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range.
The TLV2553I is characterized for operation from TA = –40°C to 85°C.
| 器件 | 状态 | 温度(oC) | 价格（美元） | 封装 | 引脚 |
| TLV2553IDWRQ1 | ACTIVE | -40 to 125 | 4.00 | 1ku | SOIC (DW) | 20 |