TLC2558 | |
Resolution(Bits) | 12 |
Sample Rate (max) | 400kSPS |
Architecture | SAR |
Power Consumption(Typ)(mW) | 9.5 |
SINAD(dB) | 71 |
SFDR(dB) | 84 |
DNL(Max)(+/-LSB) | 1 |
INL(Max)(+/-LSB) | 1 |
No Missing Codes(Bits) | 12 |
No. of Supplies | 1 |
Analog Voltage AV/DD(Min)(V) | 4.5 |
Analog Voltage AV/DD(Max)(V) | 5.5 |
Logic Voltage DV/DD(Min)(V) | 4.5 |
Logic Voltage DV/DD(Max)(V) | 5.5 |
Input Configuration Range | +4V |
Reference Mode | Int and Ext |
Rating | Catalog |
Pin/Package | 20SOIC, 20TSSOP |
# Input Channels | 8 |
Operating Temperature Range(°C) | -40 to 85,0 to 70 |
The TLC2558 and TLC2554 are a family of high-performance, 12-bit low power, 1.6 us, CMOS analog-to-digital converters (ADC) which operate from a single 5 V power supply. These devices have three digital inputs and a 3-state output [chip select (CS\), serial input-output clock (SCLK), serial data input (SDI), and serial data output (SDO)] that provide a direct 4-wire interface to the serial port of most popular host microprocessors (SPI interface). When interfaced with a DSP, a frame sync (FS) signal is used to indicate the start of a serial data frame.
In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip analog multiplexer that can select any analog inputs or one of three internal self-test voltages.
器件 | 状态 | 温度(oC) | 价格(美元) | 封装 | 引脚 |
TLC2558CDW | ACTIVE | 5.30 | 1ku | SOIC (DW) | 20 | |
TLC2558CDWG4 | ACTIVE | 5.30 | 1ku | SOIC (DW) | 20 | |
TLC2558CPW | ACTIVE | 0 to 70 | 5.30 | 1ku | TSSOP (PW) | 20 |
TLC2558CPWG4 | ACTIVE | 0 to 70 | 5.30 | 1ku | TSSOP (PW) | 20 |
TLC2558IDW | ACTIVE | 5.70 | 1ku | SOIC (DW) | 20 | |
TLC2558IDWG4 | ACTIVE | 5.70 | 1ku | SOIC (DW) | 20 | |
TLC2558IPW | ACTIVE | -40 to 85 | 6.30 | 1ku | TSSOP (PW) | 20 |
TLC2558IPWG4 | ACTIVE | -40 to 85 | 6.30 | 1ku | TSSOP (PW) | 20 |
TLC2558IPWR | ACTIVE | -40 to 85 | 5.70 | 1ku | TSSOP (PW) | 20 |
TLC2558IPWRG4 | ACTIVE | -40 to 85 | 5.70 | 1ku | TSSOP (PW) | 20 |