TL145406 三路 RS-232 驱动器/接收器
The TL145406 is a bipolar device containing three independent drivers and receivers that are used to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE). The drivers and receivers of the TL145406 are similar to those of the SN75188 quadruple driver and SN75189A quadruple receiver, respectively. The pinout matches the flow-through design of the SN75C1406 to reduce the board space required and to allow easy interconnection. The bipolar circuits and processing of the TL145406 provide a rugged low-cost solution for this function at the expense of quiescent power and external passive components relative to the SN75C1406.
The TL145406 complies with the requirements of TIA/EIA-232-F and ITU (formerly CCITT) V
|
TL145406 |
| Data Rate(kbps) |
120 |
| Drivers Per Package |
3 |
| Receivers Per Package |
3 |
| ESD HBM(kV) |
+/-2 |
| Supply Voltage(s)(V) |
+/-9.0 & 5.0 |
| ICC(Max)(mA) |
+25/-25 & 20 |
| Operating Temperature Range(°C) |
0 to 70 |
| Pin/Package |
16PDIP, 16SOIC |
| Approx. Price (US$) |
1.05 | 1ku |
| Rating |
Catalog |
| Footprint |
MC14506 |
TL145406 特性
- Meets or Exceeds the Requirements of ANSI TIA/EIA-232-F and ITU V.28
- Designed to Support Data Rates up to 120 kbit/s Over 3-m Cable
- ESD Protection Exceeds 5 kV on All Pins
- Flow-Through Design
- Wide-Driver Supply Voltage ... ±7.5 V to ±15 V
- Functionally Interchangeable With Motorola MC145406 and Texas Instruments SN75C1406
TL145406 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| TL145406DW |
ACTIVE |
0 to 70 |
1.25 | 1ku |
SOIC (DW) | 16 |
40 | TUBE |
TL145406 |
| TL145406DWE4 |
ACTIVE |
0 to 70 |
1.25 | 1ku |
SOIC (DW) | 16 |
40 | TUBE |
TL145406 |
| TL145406DWG4 |
ACTIVE |
0 to 70 |
1.25 | 1ku |
SOIC (DW) | 16 |
40 | TUBE |
TL145406 |
| TL145406DWR |
ACTIVE |
0 to 70 |
1.05 | 1ku |
SOIC (DW) | 16 |
2000 | LARGE T&R |
TL145406 |
| TL145406DWRE4 |
ACTIVE |
0 to 70 |
1.05 | 1ku |
SOIC (DW) | 16 |
2000 | LARGE T&R |
TL145406 |
| TL145406DWRG4 |
ACTIVE |
0 to 70 |
1.05 | 1ku |
SOIC (DW) | 16 |
2000 | LARGE T&R |
TL145406 |
| TL145406N |
ACTIVE |
0 to 70 |
1.15 | 1ku |
PDIP (N) | 16 |
25 | TUBE |
TL145406N |
| TL145406NE4 |
ACTIVE |
0 to 70 |
1.15 | 1ku |
PDIP (N) | 16 |
25 | TUBE |
TL145406N |
TL145406 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| TL145406DW |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
TL145406DW |
TL145406DW |
| TL145406DWE4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
TL145406DWE4 |
TL145406DWE4 |
| TL145406DWG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
TL145406DWG4 |
TL145406DWG4 |
| TL145406DWR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
TL145406DWR |
TL145406DWR |
| TL145406DWRE4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
TL145406DWRE4 |
TL145406DWRE4 |
| TL145406DWRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
TL145406DWRG4 |
TL145406DWRG4 |
| TL145406N |
Pb-Free (RoHS) |
CU NIPDAU |
N/A for Pkg Type |
TL145406N |
TL145406N |
| TL145406NE4 |
Pb-Free (RoHS) |
CU NIPDAU |
N/A for Pkg Type |
TL145406NE4 |
TL145406NE4 |
TL145406 应用技术支持与电子电路设计开发资源下载
- h 数据资料 dataSheet 下载.PDF
- TI 德州仪器RS-232 产品选型与价格 . xls
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)