TB5R1 3.3V 四路 PECL 线路接收器
These quad differential receivers accept digital data overbalanced transmission lines. They translate differential input logic levels to TTL output logic levels.
The TB5R1 is a pin- and function-compatible replacement for the Agere systems BRF1A and BRF2A; it includes 3-kV HBM and 2-kV CDM ESD protection.
The TB5R2 is a pin- and function-compatible replacement for the Agere systems BRS2A and BRS2B and incorporates a 125-mV receiver input offset, preferred state output, 3-kV HBM and 2-kV CDM ESD protection. The TB5R2 preferred state feature places the high state when the inputs are open, shorted to ground, or shorted to the power supply.
The power-down loading characteristics of the receiver input circuit are approximately 8 k
relative to the power supplies; hence they do not load the transmission line when the circuit is powered down
| TB5R1 | TB3R2 | TB5R1 | TB5R2 | |
| Signaling Rate(Mbps) | PECL | PECL | PECL | PECL |
| Input Signal | TTL | TTL | TTL | TTL |
| Output Signal | 4 | 4 | 4 | 4 |
| No. of Rx | 4 | 4 | 4 | |
| No. of Tx | 3.3 | 3.3 | 5 | 5 |
| Supply Voltage(s)(V) | 34 | 34 | 40 | 40 |
| ICC(Max)(mA) | 2.3 | 2.3 | 3 | 3 |
| Tx tpd(Typ)(ns) | 1500 | 1500 | 1500 | 1500 |
| Operating Temperature Range(C) | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 |
| Pin/Package | 16SOIC | 16SOIC | 16SOIC | 16SOIC |
TB5R1 特性
- Functional Replacements for the Agere BRF1A, BRF2A, BRS2A, and BRS2B
- Pin Equivalent to General Trade 26LS32
- High Input Impedance Approximately 8 k
- 4-ns Maximum Propagation Delay
- TB5R1 Provides 50-mV Hysteresis
- TB5R2 With -125-mV Threshold Offset for Preferred State Output
- -1.1-V to 7.1-V Common Mode Range
- Single 5-V ±10% Supply
- Slew Rate Limited (1 ns min 80% to 20%)
- TB5R2 Output Defaults to Logic 1 When Inputs Left Open or Shorted to VCC or GND
- ESD Protection HBM > 3 kV, CDM > 2 kV
- Operating Temperature Range: -40°C to 85°C
- Available in Gull-Wing SOIC (JEDEC MS-013, DW) and SOIC (D) Package
- APPLICATIONS
- Digital Data or Clock Transmission Over Balanced Lines
TB5R1 芯片订购指南
| 器件 | 状态 | 温度 | 价格 | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| TB5R1D | ACTIVE | -40 to 85 | 12.80 | 1ku | SOIC (D) | 16 | 40 | TUBE | |
| TB5R1DE4 | ACTIVE | -40 to 85 | 12.80 | 1ku | SOIC (D) | 16 | 40 | TUBE | |
| TB5R1DR | ACTIVE | -40 to 85 | 10.80 | 1ku | SOIC (D) | 16 | 2500 | LARGE T&R | |
| TB5R1DRE4 | ACTIVE | -40 to 85 | 10.80 | 1ku | SOIC (D) | 16 | 2500 | LARGE T&R |
TB5R1 质量与无铅数据
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| TB5R1D | Pb-Free (RoHS) | CU NIPDAU | Level-2-250C-1YEAR/Level-1-220C-UNLIM | TB5R1D | TB5R1D |
| TB5R1DE4 | Pb-Free (RoHS) | CU NIPDAU | Level-2-250C-1YEAR/Level-1-220C-UNLIM | TB5R1DE4 | TB5R1DE4 |
| TB5R1DR | Pb-Free (RoHS) | CU NIPDAU | Level-2-250C-1YEAR/Level-1-220C-UNLIM | TB5R1DR | TB5R1DR |
| TB5R1DRE4 | Pb-Free (RoHS) | CU NIPDAU | Level-2-250C-1YEAR/Level-1-220C-UNLIM | TB5R1DRE4 | TB5R1DRE4 |
TB5R1 应用技术支持与电子电路设计开发资源下载
- TB5R1 数据资料 dataSheet 下载.PDF
- TI 德州仪器PECL PHY选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
TB5R1 工具和软件
| 培训内容 | 型号 | 软件/工具类型 |
| TB5R1 评估模块 | TB5R1EVM | 开发电路板/EVM |