SN75C185 低功耗多路驱动器和接收器
The SN75C185 is a low-power BiMOS device containing three independent drivers and five receivers that are used to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE). Typically, the SN75C185 replaces one SN75188 and two SN75189 devices. This device conforms to TIA/EIA-232-F. The drivers and receivers of the SN75C185 are similar to those of the SN75C188 and SN75C189A, respectively. The drivers have a controlled output slew rate that is limited to a maximum of 30 V/us, and the receivers have filters that reject input noise pulses that are shorter than 1 us. Both these features eliminate the need for external components.
The SN75C185 uses the low-power BiMOS technology. In most applications, the receivers contained in this device interface to single inputs of peripheral devices such as ACEs, UARTS, or microprocessors
|
SN75C185 |
| Data Rate(kbps) |
120 |
| Drivers Per Package |
3 |
| Receivers Per Package |
5 |
| ESD HBM(kV) |
+/-2 |
| Supply Voltage(s)(V) |
+/-12.0 & 5.0 |
| ICC(Max)(mA) |
+0.25/-0.25 & 0.75 |
| Operating Temperature Range(°C) |
0 to 70 |
| Pin/Package |
20SOIC, 20PDIP |
| Approx. Price (US$) |
1.10 | 1ku |
| Rating |
Catalog |
SN75C185 特性
- Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU Recommendation V.28
- Single Chip With Easy Interface Between UART and Serial-Port Connector
- Less Than 9-mW Power Consumption
- Wide Driver Supply Voltage...4.5 V to
13.2 V
- Driver Output Slew Rate Limited to
30 V/us Max
- Receiver Input Hysteresis...1100 mV Typ
- Push-Pull Receiver Outputs
- On-Chip Receiver 1-us Noise Filter
- Functionally Interchangeable With Texas Instruments SN75185
- Operates Up to 120 kbit/s Over a 3-Meter Cable (See Application Information for Conditions)
SN75C185 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| SN75C185DW |
ACTIVE |
0 to 70 |
1.30 | 1ku |
SOIC (DW) | 20 |
25 | TUBE |
SN75C185 |
| SN75C185DWE4 |
ACTIVE |
0 to 70 |
1.30 | 1ku |
SOIC (DW) | 20 |
25 | TUBE |
SN75C185 |
| SN75C185DWG4 |
ACTIVE |
0 to 70 |
1.30 | 1ku |
SOIC (DW) | 20 |
25 | TUBE |
SN75C185 |
| SN75C185DWR |
ACTIVE |
0 to 70 |
1.10 | 1ku |
SOIC (DW) | 20 |
2000 | LARGE T&R |
SN75C185 |
| SN75C185DWRE4 |
ACTIVE |
0 to 70 |
1.10 | 1ku |
SOIC (DW) | 20 |
2000 | LARGE T&R |
SN75C185 |
| SN75C185DWRG4 |
ACTIVE |
0 to 70 |
1.10 | 1ku |
SOIC (DW) | 20 |
2000 | LARGE T&R |
SN75C185 |
| SN75C185N |
ACTIVE |
0 to 70 |
1.20 | 1ku |
PDIP (N) | 20 |
20 | TUBE |
SN75C185N |
| SN75C185NE4 |
ACTIVE |
0 to 70 |
1.20 | 1ku |
PDIP (N) | 20 |
20 | TUBE |
SN75C185N |
SN75C185 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| SN75C185DW |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75C185DW |
SN75C185DW |
| SN75C185DWE4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75C185DWE4 |
SN75C185DWE4 |
| SN75C185DWG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75C185DWG4 |
SN75C185DWG4 |
| SN75C185DWR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75C185DWR |
SN75C185DWR |
| SN75C185DWRE4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75C185DWRE4 |
SN75C185DWRE4 |
| SN75C185DWRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75C185DWRG4 |
SN75C185DWRG4 |
| SN75C185N |
Pb-Free (RoHS) |
CU NIPDAU |
N/A for Pkg Type |
SN75C185N |
SN75C185N |
| SN75C185NE4 |
Pb-Free (RoHS) |
CU NIPDAU |
N/A for Pkg Type |
SN75C185NE4 |
SN75C185NE4 |
SN75C185 应用技术支持与电子电路设计开发资源下载
- SN75C185 数据资料 dataSheet 下载.PDF
- TI 德州仪器RS-232 产品选型与价格 . xls
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)