SN75ALS192 四路差动线路驱动器
The four differential line drivers are designed for data transmission over twisted-pair or parallel-wire transmission lines. They meet the requirements of ANSI Standard EIA/TIA-422-B and ITU Recommendations V.11 and are compatible with 3-state TTL circuits. Advanced low-power Schottky technology provides high speed without the usual power penalties. Standby supply current is typically only 26 mA, while typical propagation delay time is less than 10 ns.
High-impedance inputs maintain low input currents, less than 1 uA for a high level and less than 100 uA for a low level. Complementary output-enable inputs (G and G\) allow these devices to be enabled at either a high input level or low input level. The SN75ALS192 is capable of data rates in excess of 20 Mbit/s and is designed to operate with the SN75ALS193 quadruple line receiver
|
SN75ALS192 |
| Drivers Per Package |
4 |
| Supply Voltage(s)(V) |
5 |
| ESD(kV) |
2 |
| Signaling Rate(Mbps) |
20 |
| ICC(Max)(mA) |
45 |
| Footprint |
AM26LS31 |
| Temp Range(C) |
0 to 70 |
| Rating |
Catalog |
| Operating Temperature Range(C) |
0 to 70 |
| # of TX/RX |
4 TX / 0 RX |
| Pin/Package |
16PDIP, 16SO, 16SOIC |
| Approx. Price (US$) |
0.36 | 1ku |
SN75ALS192 特性
- Meets or Exceeds the Requirements of ANSI Standard EIA/TIA-422-B and ITU Recommendation V.11
- Designed to Operate up to 20 Mbaud
- 3-State TTL Compatible
- Single 5-V Supply Operation
- High Output Impedance in Power-Off Condition
- Complementary Output-Enable Inputs
- Improved Replacement for the AM26LS31
SN75ALS192 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| SN75ALS192D |
ACTIVE |
0 to 70 |
0.43 | 1ku |
SOIC (D) | 16 |
40 | TUBE |
|
| SN75ALS192DE4 |
ACTIVE |
0 to 70 |
0.43 | 1ku |
SOIC (D) | 16 |
40 | TUBE |
|
| SN75ALS192DG4 |
ACTIVE |
0 to 70 |
0.43 | 1ku |
SOIC (D) | 16 |
40 | TUBE |
|
| SN75ALS192DR |
ACTIVE |
0 to 70 |
0.36 | 1ku |
SOIC (D) | 16 |
2500 | LARGE T&R |
|
| SN75ALS192DRE4 |
ACTIVE |
0 to 70 |
0.36 | 1ku |
SOIC (D) | 16 |
2500 | LARGE T&R |
|
| SN75ALS192DRG4 |
ACTIVE |
0 to 70 |
0.36 | 1ku |
SOIC (D) | 16 |
2500 | LARGE T&R |
|
| SN75ALS192N |
ACTIVE |
0 to 70 |
0.40 | 1ku |
PDIP (N) | 16 |
25 | TUBE |
|
| SN75ALS192NE4 |
ACTIVE |
0 to 70 |
0.40 | 1ku |
PDIP (N) | 16 |
25 | TUBE |
|
SN75ALS192 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| SN75ALS192D |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75ALS192D |
SN75ALS192D |
| SN75ALS192DE4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75ALS192DE4 |
SN75ALS192DE4 |
| SN75ALS192DG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75ALS192DG4 |
SN75ALS192DG4 |
| SN75ALS192DR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75ALS192DR |
SN75ALS192DR |
| SN75ALS192DRE4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75ALS192DRE4 |
SN75ALS192DRE4 |
| SN75ALS192DRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75ALS192DRG4 |
SN75ALS192DRG4 |
| SN75ALS192N |
Pb-Free (RoHS) |
CU NIPD |
N/A for Pkg Type |
SN75ALS192N |
SN75ALS192N |
| SN75ALS192NE4 |
Pb-Free (RoHS) |
CU NIPD |
N/A for Pkg Type |
SN75ALS192NE4 |
SN75ALS192NE4 |
SN75ALS192 应用技术支持与电子电路设计开发资源下载
- SN75ALS192 数据资料 dataSheet 下载.PDF
- TI 德州仪器RS-422选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
SN75ALS192 工具和软件