首页 > TI 德州仪器 > 逻辑 > 触发器/锁存器/寄存器

SN74LVCH32374A 具有三态输出的 32 位边沿 D 类触发器

This 32-bit edge-triggered D-type flip-flop is designed for 1.65-V to 3.6-V VCC operation.

The SN74LVCH32374A is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. It can be used as four 8-bit flip-flops, two 16-bit flip-flops, or one 32-bit flip-flop. On the positive transition of the clock (CLK) input, the Q outputs of the flip-flop take on the logic levels set up at the data (D) inputs.

A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.

OE does not affect internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended

SN74LVCH32374A
Voltage Nodes(V) 3.3, 2.7, 2.5, 1.8
Vcc range(V) 1.65 to 3.6
Input Level TTL/CMOS
Output Level LVTTL
Output Drive(mA) -24/24
No. of Outputs 32
No. of Bits 32
th(ns) 1.1
tpd max(ns) 4.9
tsu(ns) 1.9
Logic True
Technology Family LVC
Rating Catalog
SN74LVCH32374A 特性
SN74LVCH32374A 芯片订购指南
器件 状态 温度 价格(美元) 封装 | 引脚 封装数量 | 封装载体 丝印标记
SN74LVCH32374AGKER NRND -40 to 85 12.10 | 1ku LFBGA (GKE) | 96 1000 | LARGE T&R  
SN74LVCH32374AZKER ACTIVE -40 to 85 5.75 | 1ku LFBGA (ZKE) | 96 1000 | LARGE T&R  
SN74LVCH32374A 质量与无铅数据
器件 环保计划* 铅/焊球涂层 MSL 等级/回流焊峰 环保信息与无铅 (Pb-free) DPPM / MTBF / FIT 率
SN74LVCH32374AGKER TBD SNPB Level-2-235C-1 YEAR SN74LVCH32374AGKER SN74LVCH32374AGKER
SN74LVCH32374AZKER Green (RoHS & no Sb/Br) SNAGCU Level-3-260C-168 HR SN74LVCH32374AZKER SN74LVCH32374AZKER
SN74LVCH32374A 应用技术支持与电子电路设计开发资源下载
  1. SN74LVCH32374A 数据资料 dataSheet 下载.PDF
  2. TI 德州仪器触发器/锁存器/寄存器产品选型与价格 . xls
  3. Shelf-Life Evaluation of Lead-Free Component Finishes (PDF 1305 KB)
  4. Understanding and Interpreting Standard-Logic Data Sheets (PDF 857 KB)
  5. TI IBIS File Creation, Validation, and Distribution Processes (PDF 380 KB)
  6. Implications of Slow or Floating CMOS Inputs (PDF 101 KB)
  7. CMOS Power Consumption and CPD Calculation (PDF 89 KB)
  8. Designing With Logic (PDF 186 KB)
  9. Live Insertion (PDF 150 KB)
  10. Input and Output Characteristics of Digital Integrated Circuits (PDF 1708 KB)
  11. Using High Speed CMOS and Advanced CMOS in Systems With Multiple Vcc (PDF 43 KB)
  12. HiRel Unitrode Power Management Brochure (PDF 206 KB)
  13. LOGIC Pocket Data Book (PDF 6001 KB)
  14. HiRel Unitrode Power Management Brochure (PDF 206 KB)
  15. Logic Cross-Reference (PDF 2938 KB)