首页 > TI 德州仪器 > 逻辑 > 触发器/锁存器/寄存器

SN74LVC1G374-Q1 具有三态输出的汽车类单路 D 类触发器

This single D-type flip-flop is designed for 1.65-V to 5.5-V VCC operation.

The SN74LVC1G374 features a 3-state output designed specifically for driving highly capacitive or relatively low-impedance loads. This device is particularly suitable for implementing buffer registers, input/output (I/O) ports, bidirectional bus drivers, and working registers.

On the positive transition of the clock (CLK) input, the Q output is set to the logic level set up at the data (D) input.

A buffered output-enable (OE) input can be used to place the output in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the output neither loads nor drives the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.

OE does not affect the internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down

SN74LVC1G374-Q1
Pin/Package 6SC70, 6SOT-23
Operating Temperature Range(°C) -40 to 125
IOL(mA) 40
IOH(mA) -40
Vcc max(V) 5.5
Technology Family LVC
Vcc min(V) 1.65
Approx. Price (US$) 0.15 | 1ku
No. of Gates 1
tpd max(ns) 4
ICC(uA) 10
Rating Automotive
SN74LVC1G374-Q1 特性
SN74LVC1G374-Q1 芯片订购指南
器件 状态 温度 价格(美元) 封装 | 引脚 封装数量 | 封装载体 丝印标记
CLVC1G374QDBVRQ1 ACTIVE -40 to 125 0.15 | 1ku SOT-23 (DBV) | 6 3000 CA4O
CLVC1G374QDCKRQ1 ACTIVE -40 to 125 0.15 | 1ku SC70 (DCK) | 6 3000 CA4O
SN74LVC1G374-Q1 质量与无铅数据
器件 环保计划* 铅/焊球涂层 MSL 等级/回流焊峰 环保信息与无铅 (Pb-free) DPPM / MTBF / FIT 率
CLVC1G374QDBVRQ1 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CLVC1G374QDBVRQ1 CLVC1G374QDBVRQ1
CLVC1G374QDCKRQ1 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CLVC1G374QDCKRQ1 CLVC1G374QDCKRQ1
SN74LVC1G374-Q1 应用技术支持与电子电路设计开发资源下载
  1. SN74LVC1G374-Q1 数据资料 dataSheet 下载.PDF
  2. TI 德州仪器触发器/锁存器/寄存器产品选型与价格 . xls
  3. Shelf-Life Evaluation of Lead-Free Component Finishes (PDF 1305 KB)
  4. Understanding and Interpreting Standard-Logic Data Sheets (PDF 857 KB)
  5. TI IBIS File Creation, Validation, and Distribution Processes (PDF 380 KB)
  6. Implications of Slow or Floating CMOS Inputs (PDF 101 KB)
  7. CMOS Power Consumption and CPD Calculation (PDF 89 KB)
  8. Designing With Logic (PDF 186 KB)
  9. Live Insertion (PDF 150 KB)
  10. Input and Output Characteristics of Digital Integrated Circuits (PDF 1708 KB)
  11. Using High Speed CMOS and Advanced CMOS in Systems With Multiple Vcc (PDF 43 KB)
  12. HiRel Unitrode Power Management Brochure (PDF 206 KB)
  13. LOGIC Pocket Data Book (PDF 6001 KB)
  14. HiRel Unitrode Power Management Brochure (PDF 206 KB)
  15. Logic Cross-Reference (PDF 2938 KB)