The SN74CBTK32245 device provides 32 bits of high-speed TTL-compatible bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay.
The A and B ports have an active-clamp undershoot-protection circuit. When there is an undershoot, the active-clamp circuit is enabled and current from VCC is supplied to clamp the output, preventing the pass transistor from turning on.
The device is organized as four 8-bit bus switches, two 16-bit bus switches, or one 32-bit bus switch. When output-enable (OE)\ input is low, the switch is on and port A is connected to port B. When OE\ is high, the switch is open and the high-impedance state exists between the two ports.
This device is fully specified for partial-power-down applications using Ioff
SN74CBTK32245 | |
Voltage Nodes(V) | 5 |
Vcc range(V) | 4.0 to 5.5 |
No. of Bits | 32 |
Input Level | TTL |
Output Level | TTL |
ron(max)(ohms) | 20 |
Static Current(Max) | 0.006 |
tpd max(ns) | 0.25 |
Rating | Catalog |
Technology Family | CBT |
器件 | 状态 | 温度 | 价格 | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN74CBTK32245GKER | NRND | -40 to 85 | 10.70 | 1ku | LFBGA (GKE) | 96 | 1000 | LARGE T&R | |
SN74CBTK32245ZKER | ACTIVE | -40 to 85 | 5.10 | 1ku | LFBGA (ZKE) | 96 | 1000 | LARGE T&R |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN74CBTK32245GKER | TBD | SNPB | Level-2-235C-1 YEAR | SN74CBTK32245GKER | SN74CBTK32245GKER |
SN74CBTK32245ZKER | Green (RoHS & no Sb/Br) | SNAGCU | Level-3-260C-168 HR | SN74CBTK32245ZKER | SN74CBTK32245ZKER |