The SN74BCT2245 octal transceiver and line/ MOS driver is designed for asynchronous communication between data buses.
The device allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can disable the devices so that both buses are effectively isolated.
To ensure the high-impedance state during power up or power down, (OE)\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The B-port outputs, which are designed to source or sink up to 12 mA, include 33- series resistors to reduce overshoot and undershoot
SN74BCT2245 | |
Voltage Nodes(V) | 5 |
Rating | Catalog |
Technology Family | BCT |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN74BCT2245DW | ACTIVE | -40 to 85 | 1.15 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
SN74BCT2245DWE4 | ACTIVE | -40 to 85 | 1.15 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
SN74BCT2245DWG4 | ACTIVE | -40 to 85 | 1.15 | 1ku | SOIC (DW) | 20 | 25 | TUBE |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN74BCT2245DW | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74BCT2245DW | SN74BCT2245DW |
SN74BCT2245DWE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74BCT2245DWE4 | SN74BCT2245DWE4 |
SN74BCT2245DWG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74BCT2245DWG4 | SN74BCT2245DWG4 |