首页 > TI 德州仪器 > 逻辑 > 电压电平转换

SN74AVC2T245 具有可配置电压转换和三态输出的双位 2-DIR 引脚双电源总线收发器

This dual-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes.

The SN74AVC2T245 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode . The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ.

The SN74AVC2T245 is designed so that the control pins (DIR1, DIR2, and OE) are supplied by VCCA.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

The VCC isolation feature ensures that if either VCC input is at GND, both ports are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE must be connected to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver

SN74AVC2T245
Vcc range(V) 1.1 to 3.6
No. of Bits 2
No. of Outputs 2
Bus Drive(ma) -0.002,0.008
Technology Family AVC
Pin/Package 10UQFN
Approx. Price (US$) 0.46 | 1ku
Rating Catalog
SN74AVC2T245 特性
SN74AVC2T245 芯片订购指南
器件 状态 价格(美元) 封装 | 引脚 封装数量 | 封装载体 丝印标记
SN74AVC2T245RSWR ACTIVE 0.46 | 1ku UQFN (RSW) | 10 3000 | LARGE T&R  
SN74AVC2T245 质量与无铅数据
器件 环保计划* 铅/焊球涂层 MSL 等级/回流焊峰 环保信息与无铅 (Pb-free) DPPM / MTBF / FIT 率
SN74AVC2T245RSWR Green (RoHS & no Sb/Br) NIPDAU Level-1-260C-UNLIM SN74AVC2T245RSWR SN74AVC2T245RSWR
SN74AVC2T245 应用技术支持与电子电路设计开发资源下载
  1. SN74AVC2T245 数据资料 dataSheet 下载.PDF
  2. TI 德州仪器电压电平转换产品选型与价格 . xls
  3. Shelf-Life Evaluation of Lead-Free Component Finishes (PDF 1305 KB)
  4. Understanding and Interpreting Standard-Logic Data Sheets (PDF 857 KB)
  5. TI IBIS File Creation, Validation, and Distribution Processes (PDF 380 KB)
  6. Implications of Slow or Floating CMOS Inputs (PDF 101 KB)
  7. CMOS Power Consumption and CPD Calculation (PDF 89 KB)
  8. Designing With Logic (PDF 186 KB)
  9. Live Insertion (PDF 150 KB)
  10. Input and Output Characteristics of Digital Integrated Circuits (PDF 1708 KB)
  11. Using High Speed CMOS and Advanced CMOS in Systems With Multiple Vcc (PDF 43 KB)
  12. HiRel Unitrode Power Management Brochure (PDF 206 KB)
  13. LOGIC Pocket Data Book (PDF 6001 KB)
  14. HiRel Unitrode Power Management Brochure (PDF 206 KB)
  15. Logic Cross-Reference (PDF 2938 KB)