SN74ACT16373-EP 具有三态输出的增强型产品 16 位 D 类透明锁存器

The SN74ACT16373Q-EP is a 16-bit D-type transparent latch with 3-state outputs, designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

This device can be used as two 8-bit latches or one 16-bit latch. The Q outputs of the latches follow the data (D) inputs if the latch-enable (LE) input is taken high. When LE is taken low, the Q outputs are latched at the levels set up at the D inputs.

A buffered output-enable (OE)\ input can be used to place the outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly

	SN74ACT16373-EP
Voltage Nodes(V)	5
Technology Family	ABT
Rating	HiRel Enhanced Product

SN74ACT16373-EP 特性

• Controlled Baseline
  • One Assembly/Test Site, One Fabrication Site
• Extended Temperature Performance of –40°C to 125°C
• Enhanced Diminishing Manufacturing Sources (DMS) Support
• Enhanced Product Change Notification
• Qualification Pedigree
• Member of the Texas Instruments WidebusTM Family
• Inputs Are TTL-Voltage Compatible
• 3-State Bus Driving True Outputs
• Full Parallel Access for Loading
• Distributed VCC and GND Pins Minimize High-Speed Switching Noise

SN74ACT16373-EP 芯片订购指南

器件	状态	温度	价格（美元）	封装 | 引脚	封装数量 | 封装载体	丝印标记
SN74ACT16373QDLREP	ACTIVE	-55 to 125	1.40 | 1ku	SSOP (DB) | 48	2000 | LARGE T&R
V62/03602-01XE	ACTIVE	-55 to 125	1.40 | 1ku	SSOP (DB) | 48	2000 | LARGE T&R

SN74ACT16373-EP 质量与无铅数据

器件	环保计划*	铅/焊球涂层	MSL 等级/回流焊峰	环保信息与无铅 (Pb-free)	DPPM / MTBF / FIT 率
SN74ACT16373QDLREP	Green (RoHS & no Sb/Br)	CU NIPDAU	Level-1-260C-UNLIM	SN74ACT16373QDLREP	SN74ACT16373QDLREP
V62/03602-01XE	Green (RoHS & no Sb/Br)	CU NIPDAU	Level-1-260C-UNLIM	V62/03602-01XE	V62/03602-01XE

SN74ACT16373-EP 应用技术支持与电子电路设计开发资源下载

1. SN74ACT16373-EP 数据资料 dataSheet 下载.PDF
2. TI 德州仪器触发器/锁存器/寄存器产品选型与价格 . xls
3. Shelf-Life Evaluation of Lead-Free Component Finishes (PDF 1305 KB)
4. Understanding and Interpreting Standard-Logic Data Sheets (PDF 857 KB)
5. TI IBIS File Creation, Validation, and Distribution Processes (PDF 380 KB)
6. Implications of Slow or Floating CMOS Inputs (PDF 101 KB)
7. CMOS Power Consumption and CPD Calculation (PDF 89 KB)
8. Designing With Logic (PDF 186 KB)
9. Live Insertion (PDF 150 KB)
10. Input and Output Characteristics of Digital Integrated Circuits (PDF 1708 KB)
11. Using High Speed CMOS and Advanced CMOS in Systems With Multiple Vcc (PDF 43 KB)
12. HiRel Unitrode Power Management Brochure (PDF 206 KB)
13. LOGIC Pocket Data Book (PDF 6001 KB)
14. HiRel Unitrode Power Management Brochure (PDF 206 KB)
15. Logic Cross-Reference (PDF 2938 KB)