This device is designed to terminate bus lines in CMOS systems. The integrated low-impedance diodes clamp the voltage of undershoots and overshoots caused by line reflections and ensure signal integrity. The device also contains a bus-hold function that consists of a CMOS-buffer stage with a high-resistance feedback path between its output and its input. The SN74ACT1071 prevents bus lines from floating without using pullup or pulldown resistors.
The high-impedance inputs of these internal buffers are connected to the input terminals of the device. The feedback path on each internal buffer stage keeps a bus line tied to the bus holder at the last valid logic state generated by an active driver before the bus switches to the high-impedance state
SN74ACT1071 | |
Voltage Nodes(V) | 5 |
No. of Bits | 10 |
Technology Family | ACT |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN74ACT1071E | ACTIVE | -55 to 125 | 1.15 | 1ku | PDIP (N) | 14 | 25 | TUBE | |
SN74ACT1071EE4 | ACTIVE | -55 to 125 | 1.15 | 1ku | PDIP (N) | 14 | 25 | TUBE | |
SN74ACT1071MT | ACTIVE | -55 to 125 | 1.55 | 1ku | SOIC (D) | 14 | 250 | SMALL T&R | |
SN74ACT1071MTE4 | ACTIVE | -55 to 125 | 1.55 | 1ku | SOIC (D) | 14 | 250 | SMALL T&R | |
SN74ACT1071MTG4 | ACTIVE | -55 to 125 | 1.55 | 1ku | SOIC (D) | 14 | 250 | SMALL T&R |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN74ACT1071E | Pb-Free (RoHS) | CU NIPDAU | N/A for Pkg Type | SN74ACT1071E | SN74ACT1071E |
SN74ACT1071EE4 | Pb-Free (RoHS) | CU NIPDAU | N/A for Pkg Type | SN74ACT1071EE4 | SN74ACT1071EE4 |
SN74ACT1071MT | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ACT1071MT | SN74ACT1071MT |
SN74ACT1071MTE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ACT1071MTE4 | SN74ACT1071MTE4 |
SN74ACT1071MTG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ACT1071MTG4 | SN74ACT1071MTG4 |