These 20-bit transparent D-type latches feature noninverting 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
The ’ABT162841 devices can be used as two 10-bit latches or one 20-bit latch. While the latch-enable (1LE or 2LE) input is high, the Q outputs of the corresponding 10-bit latch follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the levels set up at the D inputs.
A buffered output-enable (1OE\ or 2OE\) input can be used to place the outputs of the corresponding 10-bit latch in either a normal logic state (high or low logic levels) or a high-impedance state
SN74ABT162841 | |
Voltage Nodes(V) | 5 |
Technology Family | ABT |
Rating | Catalog |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN74ABT162841DGGR | ACTIVE | -40 to 85 | 2.64 | 1ku | TSSOP (DGG) | 56 | 2000 | LARGE T&R | |
SN74ABT162841DL | ACTIVE | -40 to 85 | 2.64 | 1ku | SSOP (DL) | 56 | 20 | TUBE | |
SN74ABT162841DLG4 | ACTIVE | -40 to 85 | 2.64 | 1ku | SSOP (DL) | 56 | 20 | TUBE | |
SN74ABT162841DLR | ACTIVE | -40 to 85 | 2.64 | 1ku | SSOP (DL) | 56 | 1000 | LARGE T&R |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN74ABT162841DGGR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT162841DGGR | SN74ABT162841DGGR |
SN74ABT162841DL | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT162841DL | SN74ABT162841DL |
SN74ABT162841DLG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT162841DLG4 | SN74ABT162841DLG4 |
SN74ABT162841DLR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT162841DLR | SN74ABT162841DLR |