SN65LBC176 差动总线收发器
The SN55LBC176, SN65LBC176, SN65LBC176Q, and SN75LBC176 differential bus transceivers are monolithic, integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. They are designed for balanced transmission lines and meet ANSI Standard TIA/EIA-485-A (RS-485) and ISO 8482:1987(E).
The SN55LBC176, SN65LBC176, SN65LBC176Q, and SN75LBC176 combine a 3-state, differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, which can externally connect together to function as a direction control. The driver differential outputs and the receiver differential inputs connect internally to form a differential input/output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or VCC = 0.
|
SN55LBC176 |
SN65LBC176 |
SN75LBC176 |
| Drivers Per Package |
1 |
1 |
1 |
| Receivers Per Package |
1 |
1 |
1 |
| Supply Voltage(s)(V) |
5 |
5 |
5 |
| ESD(kV) |
2 |
2 |
2 |
| Temp Range(C) |
-55 to 125 |
-40 to 125, -40 to 85 |
0 to 70 |
| Signaling Rate(Mbps) |
10 |
10 |
10 |
| ICC(Max)(mA) |
5.4 |
1.5 |
1.5 |
| Fail Safe |
Open |
Open |
Open |
| Isolated |
No |
No |
No |
| # of TX/RX |
1 TX / 1 RX |
1 TX / 1 RX |
1 TX / 1 RX |
| Common Mode Range |
-7 to 12 |
-7 to 12 |
-7 to 12 |
| Number of Nodes |
32 |
32 |
32 |
| Duplex |
Half |
Half |
Half |
| Footprint |
SN75176 |
SN75176 |
SN75176 |
| Comments |
Upgrade to ALS176/A/B: Lower Power |
Upgrade to ALS176, Lower Power |
Upgrade to ALS176/A/B, Lower Power |
| Pin/Package |
20LCCC, 8CDIP |
8PDIP, 8SOIC |
8PDIP, 8SOIC |
| Rating |
Military |
Catalog |
Catalog |
| Fault Protection(V) |
-10 to 15 |
-10 to 15 |
-10 to 15 |
SN65LBC176 特性
- Bidirectional Transceiver
- Meets or Exceeds the Requirements of ANSI Standard TIA/EIA.485.A and
ISO 8482:1987(E)
- High-Speed Low-Power LinBiCMOSTM Circuitry
- Designed for High-Speed Operation in Both Serial and Parallel Applications
- Low Skew
- Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments
- Very Low Disabled Supply Current . . . 200 uA Maximum
- Wide Positive and Negative Input/Output Bus Voltage Ranges
- Thermal-Shutdown Protection
- Driver Positive-and Negative-Current Limiting
- Open-Circuit Failsafe Receiver Design
- Receiver Input Sensitivity . . . ±200 mV Max
- Receiver Input Hysteresis . . . 50 mV Typ
- Operates From a Single 5-V Supply
- Glitch-Free Power-Up and Power-Down Protection
- Available in Q-Temp Automotive HighRel Automotive ApplicationsConfiguration
Control / Print Support Qualification to Automotive Standards
SN65LBC176 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| SN65LBC176D |
ACTIVE |
-40 to 85 |
2.35 | 1ku |
SOIC (D) | 8 |
75 | TUBE |
|
| SN65LBC176DG4 |
ACTIVE |
-40 to 85 |
2.35 | 1ku |
SOIC (D) | 8 |
75 | TUBE |
|
| SN65LBC176DR |
ACTIVE |
-40 to 85 |
2.00 | 1ku |
SOIC (D) | 8 |
2500 | LARGE T&R |
|
| SN65LBC176DRG4 |
ACTIVE |
-40 to 85 |
2.00 | 1ku |
SOIC (D) | 8 |
2500 | LARGE T&R |
|
| SN65LBC176P |
ACTIVE |
-40 to 85 |
2.35 | 1ku |
PDIP (P) | 8 |
50 | TUBE |
|
| SN65LBC176PE4 |
ACTIVE |
-40 to 85 |
2.35 | 1ku |
PDIP (P) | 8 |
50 | TUBE |
|
SN65LBC176 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| SN65LBC176D |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65LBC176D |
SN65LBC176D |
| SN65LBC176DG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65LBC176DG4 |
SN65LBC176DG4 |
| SN65LBC176DR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65LBC176DR |
SN65LBC176DR |
| SN65LBC176DRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65LBC176DRG4 |
SN65LBC176DRG4 |
| SN65LBC176P |
Pb-Free (RoHS) |
CU NIPD |
N/A for Pkg Type |
SN65LBC176P |
SN65LBC176P |
| SN65LBC176PE4 |
Pb-Free (RoHS) |
CU NIPD |
N/A for Pkg Type |
SN65LBC176PE4 |
SN65LBC176PE4 |
SN65LBC176 应用技术支持与电子电路设计开发资源下载
- SN65LBC176 数据资料 dataSheet 下载.PDF
- TI 德州仪器RS-485选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
SN65LBC176 工具和软件