These devices are designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems. The 3-state outputs do not load the data lines when the output-enable (G\) input is at a high logic level.
To ensure the high-impedance state during power up or power down, (G\) should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver
SN54HC257 | |
Rating | Military |
Technology Family | HC |
器件 | 状态 | 温度 | 价格 | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN54HC257J | ACTIVE | -55 to 125 | 15.25 | 1ku | CDIP (J) | 16 | 1 | TUBE | |
SNJ54HC257J | ACTIVE | -55 to 125 | 12.46 | 1ku | CDIP (J) | 16 | 1 | TUBE | |
SNJ54HC257W | ACTIVE | -55 to 125 | 18.57 | 1ku | CFP (W) | 16 | 1 | TUBE |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN54HC257J | TBD | Call TI | N/A for Pkg Type | SN54HC257J | SN54HC257J |
SNJ54HC257J | TBD | Call TI | N/A for Pkg Type | SNJ54HC257J | SNJ54HC257J |
SNJ54HC257W | TBD | A42 | N/A for Pkg Type | SNJ54HC257W | SNJ54HC257W |