These d-c triggered multivibrators feature output pulse-duration control by three methods. The basic pulse time is programmed by selection of external resistance and capacitance values (see typical application data). The '122 and 'LS122 have internal timing resistors that allow the circuits to be used with only an external capacitor, if so desired. Once triggered, the basic pulse duration may be extended by retriggering the gated low-level-active (A) or high-level-active (B) inputs, or be reduced by use of the overriding clear. Figure 1 illustrates pulse control by retriggering and early clear.
The 'LS122 and 'LS123 are provided enough Schmitt hysteresis to ensure jitter-free triggering from the B input with transition rates as slow as 0
SN54123 | |
Voltage Nodes(V) | 5 |
Vcc range(V) | 4.5 to 5.5 |
Input Level | TTL |
Output Level | TTL |
Rating | Military |
Technology Family | TTL |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN54123J | ACTIVE | -55 to 125 | 3.54 | 1ku | CDIP (J) | 16 | 1 | TUBE | |
SNJ54123J | ACTIVE | -55 to 125 | 4.14 | 1ku | CDIP (J) | 16 | 1 | TUBE | |
SNJ54123W | ACTIVE | -55 to 125 | 10.84 | 1ku | CFP (W) | 16 | 1 | TUBE |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN54123J | TBD | A42 | N/A for Pkg Type | SN54123J | SN54123J |
SNJ54123J | TBD | A42 | N/A for Pkg Type | SNJ54123J | SNJ54123J |
SNJ54123W | TBD | A42 | N/A for Pkg Type | SNJ54123W | SNJ54123W |