These multivibrators feature dual negative-transition-triggered inputs and a single positive-transition-triggered input which can be used as an inhibit input. Complementary output pulses are provided.
Pulse triggering occurs at a particular voltage level and is not directly related to the transition time of the input pulse. Schmitt-trigger input circuitry (TTL hysteresis) for the B input allow jitter-free triggering from inputs with transition rates as slow as 1 volt/second, providing the circuit with an excellent noise immunity of typically 1.2 volts. A high immunity to VCC noise of typically 1.5 volts is also provided by internal latching circuitry.
Once fired, the outputs are independent of further transitions of the inputs and are a function only of the timing components
SN54121 | |
Voltage Nodes(V) | 5 |
Vcc range(V) | 4.5 to 5.5 |
Input Level | TTL |
Output Level | TTL |
Rating | Military |
Technology Family | TTL |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN54121J | ACTIVE | -55 to 125 | 3.54 | 1ku | CDIP (J) | 14 | 1 | TUBE | |
SNJ54121J | ACTIVE | -55 to 125 | 4.14 | 1ku | CDIP (J) | 14 | 1 | TUBE | |
SNJ54121W | ACTIVE | -55 to 125 | 10.84 | 1ku | CFP (W) | 14 | 1 | TUBE |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN54121J | TBD | A42 | N/A for Pkg Type | SN54121J | SN54121J |
SNJ54121J | TBD | A42 | N/A for Pkg Type | SNJ54121J | SNJ54121J |
SNJ54121W | TBD | A42 | N/A for Pkg Type | SNJ54121W | SNJ54121W |