PTH08T261W 3-A, 4.5V to 14V Input, Ceramic Cap Version, Non-Iso, Wide Output, Adjust Power Module w/ TurboTrans

PTH08T261W 描述

The PTH08T260/261W is the higher input voltage (4.5V to 14V) version of the PTH04T260/261W (2.2V to 5.5V), 3-A rated, non-isolated power module. This regulator represents the 2nd generation of the PTH series of power modules which include a reduced footprint and improved features. The PTH08T261W is optimized to be used in applications requiring all ceramic capacitors.

Operating from an input voltage range of 4.5V to 14V, the PTH08T260/261W requires a single resistor to set the output voltage to any value over the range, 0.69V to 5.5V. The wide input voltage range makes the PTH08T260/261W particularly suitable for advanced computing and server applications that use a loosely regulated 8-V to 12-V intermediate distribution bus

	PTH05T210W	PTH08T210W	PTH08T220W	PTH08T221W	PTH08T230W	PTH08T231W	PTH08T240F	PTH08T240W	PTH08T241W	PTH08T250W	PTH08T260W	PTH08T261W	PTV08T250W
Vin(Min)(V)	4.5	5.5	4.5	4.5	4.5	4.5	4.5	4.5	4.5	4.5	4.5	4.5	8
Vin(Max)(V)	5.5	14	14	14	14	14	14	14	14	14	14	14	14
Vout(Min)(V)	0.7	0.7	0.7	0.7	0.7	0.7	0.69	0.7	0.7	0.7	0.69	0.7	0.8
Vout(Max)(V)	3.6	3.6	5.5	5.5	5.5	5.5	2	5.5	5.5	3.6	5.5	5.5	3.6
Iout(Max)(A)	30	30	16	16	6	6	10	10	10	50	3	3	50
Pin/Package	14Surface Mount Module, 14Through-Hole Module	14Surface Mount Module, 14Through-Hole Module	11Surface Mount Module, 11Through-Hole Module	11Surface Mount Module, 11Through-Hole Module	10Surface Mount Module, 10Through-Hole Module	10Surface Mount Module, 10Through-Hole Module	11Surface Mount Module, 11Through-Hole Module	11Surface Mount Module, 11Through-Hole Module	11Surface Mount Module, 11Through-Hole Module	22Surface Mount Module, 22Through-Hole Module	10Surface Mount Module, 10Through-Hole Module	10Surface Mount Module, 10Through-Hole Module	21DIP MODULE
Regulated Outputs(#)	1	1	1	1	1	1	1	1	1	1	1	1	1

PTH08T261W 特性

• Up to 3-A Output Current
• 4.5-V to 14-V Input Voltage
• Wide-Output Voltage Adjust(0.69 V to 5.5 V)
• ±1.5% Total Output Voltage Variation
• Efficiencies up to 95%
• Output Overcurrent Protection (Nonlatching, Auto-Reset)
• Operating Temperature: -40°C to 85°C
• Safety Agency Approvals
  • UL/IEC/CSA-C22.2 60950-1
• Prebias Startup
• On/Off Inhibit
• Differential Output Voltage Remote Sense
• Adjustable Undervoltage Lockout
• Auto-TrackTM Sequencing
• Ceramic Capacitor Version (PTH08T261W)
• TurboTransTM Technology
• Designed to meet Ultra-Fast Transient Requirements up to 300 A/us
• SmartSync Technology
• APPLICATIONS
  • Complex Multi-Voltage Systems

PTH08T261W 芯片订购指南

器件	状态	温度	价格（美元）	封装 | 引脚	封装数量 | 封装载体	丝印标记
PTH08T261WAD	ACTIVE	-40 to 85	22.50 | 1ku	Through-Hole Module (ERP) | 10	35 | TIW TRAY
PTH08T261WAH	ACTIVE	-40 to 85	22.50 | 1ku	Through-Hole Module (ERP) | 10	35 | TIW TRAY
PTH08T261WAS	ACTIVE	-40 to 85	22.50 | 1ku	Surface Mount Module (ERQ) | 10	35 | TIW TRAY
PTH08T261WAST	ACTIVE	-40 to 85	22.50 | 1ku	Surface Mount Module (ERQ) | 10	250 | SMALL T&R
PTH08T261WAZ	ACTIVE	-40 to 85	22.50 | 1ku	Surface Mount Module (ERQ) | 10	35 | TIW TRAY
PTH08T261WAZT	ACTIVE	-40 to 85	22.50 | 1ku	Surface Mount Module (ERQ) | 10	250 | SMALL T&R

PTH08T261W 质量与无铅数据

器件	环保计划*	铅/焊球涂层	MSL 等级/回流焊峰	环保信息与无铅 (Pb-free)	DPPM / MTBF / FIT 率
PTH08T261WAD	TBD	SN	Level-1-235C-UNLIM/Level-3-260C-168HRS	PTH08T261WAD	PTH08T261WAD
PTH08T261WAH	TBD	SN	Level-1-235C-UNLIM/Level-3-260C-168HRS	PTH08T261WAH	PTH08T261WAH
PTH08T261WAS	TBD	SNPB	Level-1-235C-UNLIM/Level-3-260C-168HRS	PTH08T261WAS	PTH08T261WAS
PTH08T261WAST	TBD	SNPB	Level-1-235C-UNLIM/Level-3-260C-168HRS	PTH08T261WAST	PTH08T261WAST
PTH08T261WAZ	Pb-Free (RoHS)	SNAGCU	Level-3-260C-168 HR	PTH08T261WAZ	PTH08T261WAZ
PTH08T261WAZT	Pb-Free (RoHS)	SNAGCU	Level-3-260C-168 HR	PTH08T261WAZT	PTH08T261WAZT

PTH08T261W 应用技术支持与电子电路设计开发资源下载

1. PTH08T261W 数据资料 dataSheet 下载.PDF
2. TI 德州仪器插入电源模块产品选型与价格 . xls
3. 使用新电源模块改进表面贴装可制造性 (PDF 1747 KB)
4. QFN Layout Guidelines (PDF 1279 KB)
5. 笔记本电脑指南 (Rev. A) (PDF 2774 KB)
6. 全面认识开关型电源中的BUCK-BOOST功率级 (Rev. A) (PDF 2206 KB)
7. PowerPADTM Made Easy (PDF 57 KB)
8. 标准线性产品交叉参考 (Rev. D) (PDF 1058 KB)
9. 模数规格和性能特性术语表 (Rev. A) (PDF 1993 KB)
10. 所选封装材料的热学和电学性质 (PDF 645 KB)
11. 高速数据转换 (PDF 1967 KB)

PTD08A006W 工具与软件

名称	型号	工具/软件类型
数字电源软件	FUSION_DIGITAL_POWER_DESIGNER	应用软件