ISO7221C-HT 高温双通道 1/1 25Mbps 数字隔离器
The ISO7221 is a dual-channel digital isolator. To facilitate PCB layout, the channels are oriented in the opposite directions. This device has a logic input and output buffer separated by TI’s silicon-dioxide (SiO2) isolation barrier, providing galvanic isolation of up to 4000 V. Used in conjunction with isolated power supplies, this device blocks high voltage, isolates grounds, and prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry.
A binary input signal is conditioned, translated to a balanced signal, then differentiated by the capacitive isolation barrier. Across the isolation barrier, a differential comparator receives the logic transition information, then sets or resets a flip-flop and the output circuit accordingly
|
ISO7221C-HT |
| Number of Channels |
2 |
| Channel Configuration |
1/1 |
| Insulation Rating(VRMS) |
2500 |
| Supply Voltage(s)(V) |
3.3, 5 |
| Datarate(Mbps) |
25 |
| Input Noise Filter |
Yes |
| Prop Delay(Max)(ns) |
53 |
| TTL/CMOS Input Threshold |
TTL |
| Rating |
High Temp |
| Approx. Price (US$) |
59.50 | 1ku |
| Signaling Rate(Mbps) |
25 |
| Pin/Package |
8SOIC |
| # of TX/RX |
2 |
| VCC(Min)(V) |
3 |
| VCC(Max)(V) |
5.5 |
| Thermal Shutdown |
No |
ISO7221C-HT 特性
- 1-, 5- and 25-Mbps Signaling Rate Options
- Low Channel-to-Channel Output Skew; 1nsmax
- Low Pulse-Width Distortion (PWD); 1nsmax
- Low Jitter Content; 1 ns Typ at 150 Mbps
- 4000-Vpeak Isolation, 560 Vpeak VIORM
- UL 1577 Approved
- 50-kV/s Typical Transient Immunity
- Operates with 3.3-V or 5-V Supplies
- 4-kV ESD Protection
- High Electromagnetic Immunity
- APPLICATIONS
- Down-Hole Drilling
- High Temperature Environments
- APPLICATIONS
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Available in Extreme (–55°C/175°C)
Temperature Range(1)(2)
- Extended Product Life Cycle
- Extended Product-Change Notification
ISO7221C-HT 芯片订购指南
| 器件 |
状态 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| ISO7221CHD |
ACTIVE |
59.50 | 1ku |
SOIC(D) | 8 |
75 | BULK |
|
ISO7221C-HT 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| ISO7221CHD |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
ISO7221CHD |
ISO7221CHD |
ISO7221C-HT 应用技术支持与电子电路设计开发资源下载
- ISO7221C-HT 数据资料 dataSheet 下载.PDF
- TI 德州仪器隔离器选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)