The INA138 and INA168 are high-side, unipolar, current shunt monitors. Wide input common-mode voltage range, low quiescent current, and tiny SOT23 packaging enable use in a variety of applications.
Input common-mode and power-supply voltages are independent and can range from 2.7V to 36V for the INA138 and 2.7V to 60V for the INA168. Quiescent current is only 25uA, which permits connecting the power supply to either side of the current measurement shunt with minimal error.
The device converts a differential input voltage to a current output. This current is converted back to a voltage with an external load resistor that sets any gain from 1 to over 100. Although designed for current shunt measurement, the circuit invites creative applications in measurement and level shifting
| INA138-Q1 | |
| Gain (V/V) | 1 to 100 |
| Common Mode Range (Min) | 2.7 |
| Common Mode Range (Max) | 36 |
| Output Type | Current |
| Input Offset (+/-) (Max) (uV) | 2000 |
| Input Offset Drift (+/-) (Max) (uV/Degrees Celsius) | 1 |
| CMRR (Min) (dB) | 100 |
| Small-Signal Bandwidth (Typ) (MHz) | 0.8 |
| Quiescent Current (+/-) (Typ) (mA) | 0.025 |
| Vs (Min) (V) | 2.7 |
| Vs (Max) (V) | 36 |
| Operating Temperature Range (C) | -40 to 125 |
| Pin/Package | 8TSSOP |
| 器件 | 状态 | 温度 | 价格 | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| INA138QPWRQ1 | ACTIVE | -40 to 125 | 0.80 | 1ku | TSSOP (PW) | 8 | 2000 |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| INA138QPWRQ1 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-2-260C-1 YEAR | INA138QPWRQ1 | INA138QPWRQ1 |