DRV593 +/-3A 高效 PWM 功率驱动器
The DRV593 and DRV594 are high-efficiency, high-current power amplifiers ideal for driving a wide variety of thermoelectric cooler elements in systems powered from 2.8 V to 5.5 V. The operation of the device requires only one inductor and capacitor for the output filter, saving significant printed-circuit board area. Pulse-width modulation (PWM) operation and low output stage on-resistance significantly decrease power dissipation in the amplifier.
The DRV593 and DRV594 are internally protected against thermal and current overloads. Logic-level fault indicators signal when the junction temperature has reached approximately 128°C to allow for system-level shutdown before the amplifier’s internal thermal shutdown circuitry activates
|
DRV590 |
DRV592 |
DRV593 |
DRV594 |
Vs (Min) (V) |
2.7 |
|
|
|
Vs (Max) (V) |
5.5 |
|
|
|
Output Current (Min) (A) |
1.2 |
|
|
|
Saturation Voltage (Max) (V) |
0.48 |
0.195 |
0.195 |
0.195 |
rDS(on) (Ohms) |
0.4 |
0.065 |
0.06 |
0.06 |
Switching Frequency (Single-Ended) (kHz) |
500 |
|
|
|
Iq (mA) |
4 |
7 |
4 |
4 |
Operating Temperature Range (C) |
-40 to 85 |
-40 to 85 |
-40 to 85 |
-40 to 85 |
Pin/Package |
20SO PowerPAD, 48BGA MICROSTAR JUNIOR |
32HLQFP |
32HLQFP |
32HLQFP |
DRV593 特性
- Operation Reduces Output Filter Size and Cost
by 50% Compared to DRV591
- ±3-A Maximum Output Current
- Low Supply Voltage Operation: 2.8 V to 5.5 V
- High Efficiency Generates Less Heat
- Overcurrent and Thermal Protection
- Fault Indicators for Overcurrent, Thermal and
Undervoltage Conditions
- Two Selectable Switching Frequencies
- Internal or External Clock Sync
- PWM Scheme Optimized for EMI
- 9×9 mm PowerPADTM Quad Flatpack Package
- APPLICATIONS
- Thermoelectric Cooler (TEC) Driver
- Laser Diode Biasing
DRV593 芯片订购指南
DRV593 质量与无铅数据
器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
DRV593VFP |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
DRV593VFP |
DRV593VFP |
DRV593VFPG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
DRV593VFPG4 |
DRV593VFPG4 |
DRV593VFPR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
DRV593VFPR |
DRV593VFPR |
DRV593VFPRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
DRV593VFPRG4 |
DRV593VFPRG4 |
DRV593 应用技术支持与电子电路设计开发资源下载
- DRV593 数据资料 dataSheet 下载.PDF
- TI 德州仪器特殊功能放大器产品选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 高速数据转换 (PDF 1967 KB)
- 使您的仪器放大器设计达到最佳效果 (zhct011.PDF, 897 KB)
- 低成本电流并联监视器 IC 使动圈式仪表设计复兴 (zhct030.PDF, 1.04 MB)
- Demystifying the Operational Transconductance Amplifier (sboa117.HTM, 8 KB)
- Using the DRV593 with the DRV593 to Generate 4mA to 20mA Output (PDF 167 KB)
- 在 PSPICE 中使用德州仪器 (TI) SPICE 模型 (zhca088.HTM, 8 KB)
- PowerPADTM Thermally Enhanced Package (slma002g.HTM, 8 KB)
- 运算放大器的单电源操作 (PDF 2174 KB)
- Tuning in Amplifiers (PDF 44 KB)
- Op Amp Performance Analysis (PDF 76 KB)
- An Error Analysis of the ISO102 in a Small Signal Measuring Application (PDF 29 KB)
- Level Shifting Signals with Differential Amplifiers (PDF 23 KB)
- Operational Amplifier Macromodels: A Comparison (PDF 59 KB)
DRV593 工具与软件
培训内容 |
型号 |
软件/工具类型 |
DRV593EVM 评估模块 |
DRV593EVM |
开发电路板/EVM |