CD40117B is a dual 4-bit terminator that can be programmed by means of STROBE and DATA control bits to function as pull-up or pull-down resistors. The CD40117B can also be programmed to function as latches to terminate any open or unused CMOS logic when used with 3-state logic or during a power-down condition. Considerable savings in power and board space can be realized when this device is used to replace pull-up or pull-down resistors. When the STROBE is in the logic "1" state, the terminator functions as a pull-up resistor if the DATA input is a logic "1" or as a pull down resistor if the DATA input is a logic "0".
When the STROBE is in the logic "0" state, the terminator performs the latch functions,
CD40117B | |
Voltage Nodes(V) | 5, 10, 15 |
Technology Family | CD4000 |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
CD40117BE | ACTIVE | -55 to 125 | 1.15 | 1ku | PDIP (N) | 14 | 25 | TUBE | |
CD40117BEE4 | ACTIVE | -55 to 125 | 1.15 | 1ku | PDIP (N) | 14 | 25 | TUBE | |
CD40117BMT | ACTIVE | -55 to 125 | 1.55 | 1ku | SOIC (D) | 14 | 250 | SMALL T&R | |
CD40117BMTE4 | ACTIVE | -55 to 125 | 1.55 | 1ku | SOIC (D) | 14 | 250 | SMALL T&R | |
CD40117BMTG4 | ACTIVE | -55 to 125 | 1.55 | 1ku | SOIC (D) | 14 | 250 | SMALL T&R |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
CD40117BE | Pb-Free (RoHS) | CU NIPDAU | N/A for Pkg Type | CD40117BE | CD40117BE |
CD40117BEE4 | Pb-Free (RoHS) | CU NIPDAU | N/A for Pkg Type | CD40117BEE4 | CD40117BEE4 |
CD40117BMT | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | CD40117BMT | CD40117BMT |
CD40117BMTE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | CD40117BMTE4 | CD40117BMTE4 |
CD40117BMTG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | CD40117BMTG4 | CD40117BMTG4 |