The 'ACT16543 are 16-bit registered transceivers that contain two sets of D-type latches for temporary storage of data flowing in either direction. The 'ACT16543 can be used as two 8-bit transceivers or one 16-bit transceiver. Separate latch enable (
or
) and output-enable (
or
) inputs are provided for each register to permit independent control in either direction of data flow.
The A-to-B enable (
) and
inputs must be low to enter data from A or to output data to B. Having CEAB\ low and LEAB\ low makes the A-to-B latches transparent; a subsequent low-to-high transition at
puts the A latches in the storage mode. Data flow from B to A is similar, but requires using the
,
, and
inputs
| 74ACT16543 | |
| Voltage Nodes(V) | 5 |
| Vcc range(V) | 4.5 to 5.5 |
| Input Level | TTL |
| Output Level | CMOS |
| Output Drive(mA) | -24/24 |
| No. of Outputs | 16 |
| Logic | True |
| Static Current | 0.08 |
| th(ns) | 4 |
| tpd max(ns) | 11.6 |
| tsu(ns) | 2.5 |
| Technology Family | ACT |
| Rating | Catalog |
| 器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| 74ACT16543DL | ACTIVE | -40 to 85 | 12.85 | 1ku | SSOP (DL) | 56 | 20 | TUBE | ACT16543 |
| 74ACT16543DLR | ACTIVE | -40 to 85 | 10.70 | 1ku | SSOP (DL) | 56 | 1000 | LARGE T&R | ACT16543 |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| 74ACT16543DL | Pb-Free (RoHS) | CU NIPDAU | N/A for Pkg Type | 74ACT16543DL | 74ACT16543DL |
| 74ACT16543DLR | Pb-Free (RoHS) | CU NIPDAU | N/A for Pkg Type | 74ACT16543DLR | 74ACT16543DLR |