uPSD3454E 具有可编程逻辑和USB的uPSD3400系列8032微控制器

The Turbo Plus uPSD34xx Series combines a powerful 8051-based microcontroller with a flexible memory structure, programmable logic, and a rich peripheral mix to form an ideal embedded controller. At its core is a fast 4-cycle 8032 MCU with a 4-byte instruction prefetch queue (PFQ) and a 4-entry fully associative branching cache (BC). The MCU is connected to a 16-bit internal instruction path to maximize performance, enabling loops of code in smaller localities to execute extremely fast. The 16-bit wide instruction path in the Turbo Plus Series allows double-byte instructions to be fetched from memory in a single memory cycle. This keeps the average performance near its peak performance (peak performance for 5V, 40MHz Turbo Plus uPSD34xx is 10 MIPS for single-byte instructions, and average performance will be approximately 9 MIPS for mix of single- and multi-byte instructions). USB 2.0 (full speed, 12Mbps) is included, providing 10 endpoints, each with its own 64-byte FIFO to maintain high data throughput. Endpoint 0 (Control Endpoint) uses two of the 10 endpoints for In and Out directions, the remaining eight endpoints may be allocated in any mix to either type of transfers: Bulk or Interrupt. Code development is easily managed without a hardware In-Circuit Emulator by using the serial JTAG debug interface. JTAG is also used for In-System Programming (ISP) in as little as 10 seconds, perfect for manufacturing and lab development. The 8032 core is coupled to Programmable System Device (PSD) architecture to optimize the 8032 memory structure, offering two independent banks of Flash memory that can be placed at virtually any address within 8032 program or data address space, and easily paged beyond 64K bytes using onchip programmable decode logic. Dual Flash memory banks provide a robust solution for remote product updates in the field through In-Application Programming (IAP). Dual Flash banks also support EEPROM emulation, eliminating the need for external EEPROM chips. General purpose programmable logic (PLD) is included to build an endless variety of gluelogic, saving external logic devices. The PLD is configured using the software development tool, PSDsoft Express, available from the web at www.st.com/psm, at no charge. The uPSD34xx also includes supervisor functions such as a programmable watchdog timer and low-voltage reset.

uPSD3454E 特征:

• Fast 8-bit Turbo 8032 MCU, 40 MHz
  – Advanced core, 4-clocks per instruction
  – 10 MIPs peak performance at 40MHz (5V)
  – JTAG Debug and In-System Programming
  – 16-bit internal instruction path fetches double-byte instruction in a single memory cycle
  – Branch Cache & 4 instruction Prefetch Queue
  – Dual XDATA pointers with automatic increment and decrement
  – Compatible with 3rd party 8051 tools
• Dual Flash memories with memory management
  – Place either memory into 8032 program address space or data address space
  – READ-while-WRITE operation for In- Application Programming and EEPROM emulation
  – Single voltage program and erase
  – 100K guaranteed erase cycles, 15-year retention
• Clock, reset, and power supply management
  – SRAM is Battery Backup capable
  – Flexible 8-level CPU clock divider register
  – Normal, Idle, and Power Down Modes
  – Power-on and Low Voltage reset supervisor
  – Programmable Watchdog Timer
• Programmable logic, general purpose
  – 16 macrocells for logic applications (e.g., shifters, state machines, chip-selects, gluelogic to keypads, and LCDs)
• A/D converter
  – Eight Channels, 10-bit resolution, 6μs
• Communication interfaces
  – USB v2.0 Full Speed (12Mbps)
  – 10 endpoint pairs (In/Out), each endpoint with 64-byte FIFO (supports Control, Intr, and Bulk transfer types)
  – I2C Master/Slave controller, 833kHz
  – SPI Master controller, 10MHz
  – Two UARTs with independent baud rate
  – IrDA Potocol: up to 115 kbaud
  – Up to 46 I/O, 5V tolerant uPSD34xxV
• Timers and interrupts
  – Three 8032 standard 16-bit timers
  – Programmable Counter Array (PCA), six 16-bit modules for PWM, CAPCOM, and timers
  – 8/10/16-bit PWM operation
  – 12 Interrupt sources with two external interrupt pins
• Operating voltage source (±10%)
  – 5V Devices: 5.0V and 3.3V sources
  – 3.3V Devices: 3.3V source

uPSD3454E 订货型号:

Device	Part Number	Max MHz	1st Flash	2nd Flash	SRAM	GPIO	8032 bus	VCC (V)	VDD	Pkg.	Temp.
uPSD3422E	uPSD3422E-40T6	40	64 KB	32 KB	4 KB	35	No	3.3V	5.0V	TQFP52	–40°C to 85°C
	uPSD3422E-40U6	40	64 KB	32 KB	4 KB	46	Yes	3.3V	3.3V	TQFP52	–40°C to 85°C
uPSD3422EV	uPSD3422EV-40T6	40	64 KB	32 KB	4 KB	35	No	3.3V	5.0V	TQFP80	–40°C to 85°C
	uPSD3422EV-40U6	40	64 KB	32 KB	4 KB	46	Yes	3.3V	3.3V	TQFP80	–40°C to 85°C
uPSD3433E	uPSD3433E-40T6	40	128 KB	32 KB	8 KB	35	No	3.3V	5.0V	TQFP52	–40°C to 85°C
	uPSD3433E-40U6	40	128 KB	32 KB	8 KB	46	Yes	3.3V	3.3V	TQFP52	–40°C to 85°C
uPSD3433EV	uPSD3433EV-40T6	40	128 KB	32 KB	8 KB	35	No	3.3V	5.0V	TQFP80	–40°C to 85°C
	uPSD3433EV-40U6	40	128 KB	32 KB	8 KB	46	Yes	3.3V	3.3V	TQFP80	–40°C to 85°C
uPSD3434E	uPSD3434E-40T6	40	256 KB	32 KB	8 KB	35	No	3.3V	5.0V	TQFP52	–40°C to 85°C
	uPSD3434E-40U6	40	256 KB	32 KB	8 KB	46	Yes	3.3V	3.3V	TQFP52	–40°C to 85°C
uPSD3434EV	uPSD3434EV-40T6	40	256 KB	32 KB	8 KB	35	No	3.3V	5.0V	TQFP80	–40°C to 85°C
	uPSD3434EV-40U6	40	256 KB	32 KB	8 KB	46	Yes	3.3V	3.3V	TQFP80	–40°C to 85°C
uPSD3454E	uPSD3454E-40T6	40	256 KB	32 KB	32 KB	35	No	3.3V	5.0V	TQFP52	–40°C to 85°C
	uPSD3454E-40U6	40	256 KB	32 KB	32 KB	46	Yes	3.3V	3.3V	TQFP52	–40°C to 85°C
uPSD3454EV	uPSD3454EV-40T6	40	256 KB	32 KB	32 KB	35	No	3.3V	5.0V	TQFP80	–40°C to 85°C
	uPSD3454EV-40U	40	256 KB	32 KB	32 KB	46	Yes	3.3V	3.3V	TQFP80	–40°C to 85°C
	uPSD3422EB40T6	40	64 KB	32 KB	4 KB	35	No	3.3V	5.0V	TQFP52	–40°C to 85°C
	uPSD3422EB40U6	40	64 KB	32 KB	4 KB	46	Yes	3.3V	3.3V	TQFP52	–40°C to 85°C
	uPSD3422EVB40T6	40	64 KB	32 KB	4 KB	35	No	3.3V	5.0V	TQFP80	–40°C to 85°C
	uPSD3422EVB40U6	40	64 KB	32 KB	4 KB	46	Yes	3.3V	3.3V	TQFP80	–40°C to 85°C
	uPSD3433EB40T6	40	128 KB	32 KB	8 KB	35	No	3.3V	5.0V	TQFP52	–40°C to 85°C
	uPSD3433EB40U6	40	128 KB	32 KB	8 KB	46	Yes	3.3V	3.3V	TQFP52	–40°C to 85°C
	uPSD3433EVB40T6	40	128 KB	32 KB	8 KB	35	No	3.3V	5.0V	TQFP80	–40°C to 85°C
	uPSD3433EVB40U6	40	128 KB	32 KB	8 KB	46	Yes	3.3V	3.3V	TQFP80	–40°C to 85°C
	uPSD3434EB40T6	40	256 KB	32 KB	8 KB	35	No	3.3V	5.0V	TQFP52	–40°C to 85°C
	uPSD3434EB40U6	40	256 KB	32 KB	8 KB	46	Yes	3.3V	3.3V	TQFP52	–40°C to 85°C
	uPSD3434EVB40T6	40	256 KB	32 KB	8 KB	35	No	3.3V	5.0V	TQFP80	–40°C to 85°C
	uPSD3434EVB40U6	40	256 KB	32 KB	8 KB	46	Yes	3.3V	3.3V	TQFP80	–40°C to 85°C
	uPSD3454EB40T6	40	256 KB	32 KB	32 KB	35	No	3.3V	5.0V	TQFP52	–40°C to 85°C
	uPSD3454EB40U6	40	256 KB	32 KB	32 KB	46	Yes	3.3V	3.3V	TQFP52	–40°C to 85°C
	uPSD3454EVB40T6	40	256 KB	32 KB	32 KB	35	No	3.3V	5.0V	TQFP80	–40°C to 85°C
	uPSD3454EVB40U6	40	256 KB	32 KB	32 KB	46	Yes	3.3V	3.3V	TQFP80	–40°C to 85°C

uPSD3454E 技术支持与电子电路设计开发资源下载

1. ST 意法μPSD 系列单片机 uPSD34数据手册DataSheet 下载.PDF
2. 具有可编程逻辑和USB的uPSD3400系列8032微控制器
3. ST 意法μPSD系列单片机选购指南
4. 基于μPSD3200 的人机对话设计 .PDF
5. μPSD单片机中存储器系统的配置
6. μPSD3400功能框图 .jpg
7. μPSD3400内部结构 .gif
8. μPSD3400命名规则 .jpg
9. ST 意法 uPSD系列单片机选购指南
10. 基于uPSD3200 的人机对话设计 .PDF
11. uPSD中存储器系统的配置(编号:000)
12. uPSD3200系列单片机概述 .DOC(编号:001)
13. 意法半导体应用支持 . PDF
14. 先进半导体解决方案的门电子
15. 电机控制参考指南
16. 周围半导体机顶盒应用. PDF
17. 汽车的8位闪存微控制器. PDF
18. 8 ,16和32位微控制器产品和工具选择指南. PDF
19. 电机控制选型指南. PDF

uPSD3454E 产品IP来源：http://www.WOSENDONGLI.com/ST/uPSD3400