uPSD3212A-40T6 带有可编程逻辑和USB接口TQFP-52封装

The UPSD321xx Series combines a fast 8051-based microcontroller with a flexible memory structure, programmable logic, and a rich peripheral mix including USB, to form an ideal embedded controller. At its core is an industry-standard 8032 MCU operating up to 40MHz. A JTAG serial interface is used for In-System Programming (ISP) in as little as 10 seconds, perfect for manufacturing and lab development. The USB 1.1 low-speed interface has one Control endpoint and two Interrupt endpoints suitable for HID class drivers. The 8032 core is coupled to Programmable System Device (PSD) architecture to optimize the 8032 memory structure, offering two independent banks of Flash memory that can be placed at virtually any address within 8032 program or data address space, and easily paged beyond 64 Kbytes using on-chip programmable decode logic. Dual Flash memory banks provide a robust solution for remote product updates in the field through In-Application Programming (IAP). Dual Flash banks also support EEPROM emulation, eliminating the need for external EEPROM chips. General purpose programmable logic (PLD) is included to build an endless variety of gluelogic, saving external logic devices. The PLD is configured using the software development tool, PSDsoft Express, available from the web at www.st.com/psm, at no charge. The UPSD321xx also includes supervisor functions such as a programmable watchdog timer and low-voltage reset. In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK? packages, depending on their level of environmental compliance. ECOPACK? specifications, grade definitions and product status are available at: www.st.com. ECOPACK? is an ST trademark.

uPSD3212A-40T6 特征:

• FAST 8-BIT 8032 MCU
  – 40MHz at 5.0V, 24MHz at 3.3V
  – Core, 12-clocks per instruction
• DUAL FLASH MEMORIES WITH MEMORY MANAGEMENT
  – Place either memory into 8032 program address space or data address space
  – READ-while-WRITE operation for In- Application Programming and EEPROM emulation
  – Single voltage program and erase
  – 100K minimum erase cycles, 15-year retention
• CLOCK, RESET, AND SUPPLY MANAGEMENT
  – SRAM is Battery Backup capable
  – Normal, Idle, and Power Down Modes
  – Power-on and Low Voltage reset supervisor
  – Programmable Watchdog Timer
• PROGRAMMABLE LOGIC, GENERAL PURPOSE
  – 16 macrocells
  – Implements state machines, glue-logic, and so forth
• COMMUNICATION INTERFACES
  – I2C Master/Slave bus controller
  – Two UARTs with independent baud rate
  – Six I/O ports with up to 46 I/O pins
  – 8032 Address/Data bus available on TQFP80 package
  – 5 PWM outputs, 8-bit resolution
  – USB v1.1, low-speed 1.5Mbps, 3
  endpoints (uPSD3212A only)
• JTAG IN-SYSTEM PROGRAMMING
  – Program the entire device in as little as 10 seconds
• A/D CONVERTER
  – Four channels, 8-bit resolution, 10μs
• TIMERS AND INTERRUPTS
  – Three 8032 standard 16-bit timers
  – 10 Interrupt sources with two external interrupt pins
• Single Supply Voltage
  – 4.5 to 5.5V
  – 3.0 to 3.6V

uPSD3212A-40T6 订货型号:

Device	Order code	Max. clock (MHz)	1st Flash	2nd Flash	SRAM	GPIO	USB	8032 bus	VCC (V)	Pkg.	Temp.
uPSD3212C	uPSD3212C-40T6	40	64 KB	16 KB	2 KB	37	No	No	4.5-5.5	TQFP52	–40°C to 85°C
	uPSD3212CV-24T6	24	64 KB	16 KB	2 KB	37	No	No	3.0-3.6	TQFP52	–40°C to 85°C
uPSD3212CV	uPSD3212C-40U6	40	64 KB	16 KB	2 KB	46	No	Yes	4.5-5.5	TQFP80	–40°C to 85°C
	uPSD3212CV-24U6	24	64 KB	16 KB	2 KB	46	No	Yes	3.0-3.6	TQFP80	–40°C to 85°C
uPSD3212A	uPSD3212A-40T6	40	64 KB	16 KB	2 KB	37	Yes	No	4.5-5.5	TQFP52	–40°C to 85°C
	uPSD3212A-40U6	40	64 KB	16 KB	2 KB	46	Yes	Yes	4.5-5.5	TQFP80	–40°C to 85°C

uPSD3212A-40T6 技术支持与电子电路设计开发资源下载

1. ST意法μ PSD 系列单片机 uPSD3212A数据手册DataSheet 下载.PDF
2. ST 意法 uPSD系列单片机选购指南
3. 基于uPSD3200 的人机对话设计 .PDF
4. uPSD中存储器系统的配置(编号:000)
5. uPSD3200系列单片机概述 .DOC(编号:001)
6. 意法半导体应用支持 . PDF
7. 先进半导体解决方案的门电子
8. 电机控制参考指南
9. 周围半导体机顶盒应用. PDF
10. 汽车的8位闪存微控制器. PDF
11. 8 ,16和32位微控制器产品和工具选择指南. PDF
12. 电机控制选型指南. PDF

uPSD3212CV-24T6 产品IP来源：http://www.WOSENDONGLI.com/ST/uPSD3200