STM32F102C4 ARM的32位微控制器与16/32或Flash,USB接口,5定时器,ADC和5通信接口
This datasheet provides the ordering information and mechanical device characteristics of
the STM32F102x4 and STM32F102x6 low-density USB access line microcontrollers. For
more details on the whole STMicroelectronics STM32F102xx family, please refer to
Section 2.2: Full compatibility throughout the family.
The medium-density STM32F102xx datasheet should be read in conjunction with the low-,
medium- and high-density STM32F10xxx reference manual.
For information on programming, erasing and protection of the internal Flash memory
please refer to the STM32F10xxx Flash programming manual.
The reference and Flash programming manuals are both available from the
STMicroelectronics website www.st.com.
For information on the Cortex?-M3 core please refer to the Cortex?-M3 Technical
Reference Manual, available from the www.arm.com website at the following address:
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0337e/.
STM32F102C4 订购型号:
Ordering Model |
Package |
RoHS Compliance Grade |
Marketing Status |
Pin Count |
Program Memory Type |
Internal ROM Size |
Internal RAM Size |
A/D Converter |
12 or 16-bit timer (IC/OC/PWM) |
Other timer functions |
Serial Interface |
Supply Voltage(Vcc) |
Supply Voltage(Vcc) |
Packing Type |
nom |
nom |
nom |
min |
max |
kB |
B |
V |
V |
STM32F102C4T6A |
LQFP 48 7x7x1.4 1 |
Ecopack2 (**) |
Active |
48 |
FLASH |
16 |
4096 |
10x12-bit |
2x16-bit |
2 x WDG, RTC, 24-bit down counter |
1xSPI/1xI2C/2xUSART/USB |
2 |
3.6 |
Tray |
STM32F102C4 特征:
- Core: ARM 32-bit Cortex?-M3 CPU
– 48 MHz maximum frequency,
1.25 DMIPS/MHz (Dhrystone 2.1)
performance at 0 WS memory access
– Single-cycle multiplication and hardware
division
- emories
– 16 or 32 Kbytes of Flash memory
– 4 or 6 Kbytes of SRAM
- Clock, reset and supply management
– 2.0 to 3.6 V application supply and I/Os
– POR, PDR and programmable voltage
detector (PVD)
– 4-to-16 MHz crystal oscillator
– Internal 8 MHz factory-trimmed RC
– Internal 40 kHz RC
– PLL for CPU clock
– 32 kHz oscillator for RTC with calibration
- Low power
– Sleep, Stop and Standby modes
– VBAT supply for RTC and backup registers
- Debug mode
– Serial wire debug (SWD) and JTAG
interfaces
- DMA
– 7-channel DMA controller
– Peripherals supported: timers, ADC, SPIs,
I2Cs and USARTs
1 × 12-bit, 1.2 μs A/D converter (up to 16
channels)
– Conversion range: 0 to 3.6 V
– Temperature sensor
- Up to 51 fast I/O ports
– 37/51 IOs all mappable on 16 external
interrupt vectors and almost all 5 V-tolerant
- Up to 5 timers
– Two 16-bit timers, each with up to 4
IC/OC/PWM or pulse counter
– 2 watchdog timers (Independent and
Window)
– SysTick timer: 24-bit downcounter
- Up to 5 communication interfaces
– 1 x I2C interface (SMBus/PMBus)
– 2 USARTs (ISO 7816 interface, LIN, IrDA
capability, modem control)
– 1 SPI (12 Mbit/s)
– USB 2.0 full speed interface
- CRC calculation unit, 96-bit unique ID
- ECOPACK? packages
STM32F102C4 技术支持与电子电路设计开发资源下载
- STM32F102C4 数据资料DataSheet下载.PDF
- 相关产品选型( Excel 文档格式)
- STM32 选型指南
- 《技术手册》STM32技术参考手册部分章节.PDF
- 意法半导体应用支持 . PDF
- 先进半导体解决方案的门电子
- 电机控制参考指南
- 32位汽车微控制器底盘和安全应用
- 汽车的32位闪存微控制器汽车车身应用. PDF
- 汽车的32位闪存微控制器为群集应用程序. PDF
- 周围半导体机顶盒应用. PDF
- STM32开发工具. PDF
- STM32,STR7和STR9开发工具 . PDF
- 8 ,16和32位微控制器产品和工具选择指南. PDF
- 电机控制选型指南. PDF