STM32F101C8 _ ST 代理商WOSENDONGLI 代理意法STM32F101C8

STM32F101C8 STM32 ARM核微控制器

STM32F101C8 参数

.ROM 64K
RAM 10 K
定时器 2x16-bit (8/8/8)
.串口1xSPI/1xI2C/2xUSART* I/Os 32(32)
封装形式 LQFP48
适用电压2 to 3.6 V

Reference	Root part number
STM32F101x6	STM32F101C6, STM32F101R6, STM32F101T6
STM32F101x8	STM32F101C8, STM32F101R8,STM32F101V8, STM32F101T8
STM32F101xB	STM32F101RB, STM32F101VB,STM32F101CB

STM32F101C8 订货型号:

Ordering Model

Package

RoHS Compliance Grade

Marketing Status

Pin Count

Program Memory Type

Internal ROM Size

Internal RAM Size

A/D Converter

12 or 16-bit timer (IC/OC/PWM)

Other timer functions

Serial Interface

I/Os (High Current)

Supply Voltage(Vcc)

Packing Type

ESample Flag

nom

min

max

STM32F101C8T6

LQFP 48 7x7x1.4 1

Ecopack2

Active

FLASH

10240

10x12-bit

3x16-bit (12/12/12)

2xWDG, RTC, 24-bit down counter

2xSPI/2xI²C/3xUSART(IrDa/ISO7816)

36(36)

3.6

Tray

Yes

STM32F101C8 说明

The STM32F101x6, STM32F101xB and STM32F101x8 Medium-density access line family incorporates the high-performance ARM Cortex?-M3 32-bit RISC core operating at a 36 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 16 Kbytes), and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (two I2Cs,two SPIs, and up to three USARTs), one 12-bit ADC and three general purpose 16-bit timers.

The STM32F101xx Medium-density access line family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications. The STM32F101xx Medium-density access line family includes devices in four different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family. These features make the STM32F101xx High-density access line microcontroller family suitable for a wide range of applications:

Application control and user interface
Medical and handheld equipment
PC peripherals, gaming and GPS platforms
Industrial applications: PLC, inverters, printers, and scanners
Alarm systems, Video intercom, and HVAC

STM32F101C8 特性:

Core: ARM 32-bit Cortex?-M3 CPU
– 36 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
– Single-cycle multiplication and hardware division
Memories
– 32 to 128 Kbytes of Flash memory
– 6 to 16 Kbytes of SRAM
Clock, reset and supply management
– 2.0 to 3.6 V application supply and I/Os
– POR, PDR and programmable voltage detector (PVD)
– 4-to-16 MHz crystal oscillator
– Internal 8 MHz factory-trimmed RC
– Internal 40 kHz RC
– PLL for CPU clock
– 32 kHz oscillator for RTC with calibration
Low power
– Sleep, Stop and Standby modes
– VBAT supply for RTC and backup registers
Debug mode
– Serial wire debug (SWD) and JTAG interfaces
DMA
– 7-channel DMA controller
– Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
1 × 12-bit, 1 μs A/D converter (up to 16 channels)
– Conversion range: 0 to 3.6 V
– Temperature sensor
Up to 80 fast I/O ports
– 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors, all 5 V-tolerant except for analog inputs
Up to 6 timers
– Up to three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter
– 2 watchdog timers (Independent and Window)
– SysTick timer: 24-bit downcounter
Up to 7 communication interfaces
– Up to 2 x I2C interfaces (SMBus/PMBus)
– Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
– Up to 2 SPIs (18 Mbit/s)
CRC calculation unit, 96-bit unique ID
ECOPACK? packages

STM32F101C8 STM32 ARM核微控制器

STM32F101C8 参数

STM32F101C8 订货型号:

STM32F101C8 说明

STM32F101C8 特性:

STM32F101C8 技术支持与电子电路设计开发资源下载