ST7MC1K4 8位微控制器与嵌套中断,Flash,10位ADC, 无刷电机控制,五个计时器的SPI

The ST7MCx device is member of the ST7 microcontroller family designed for mid-range applications with a Motor Control dedicated peripheral.All devices are based on a common industrystandard 8-bit core, featuring an enhanced instruction set and are available with FLASH, ROM or FASTROM program memory.Under software control, all devices can be placed in WAIT, SLOW, ACTIVE-HALT or HALT mode,reducing power consumption when the application is in idle or stand-by state.

The enhanced instruction set and addressing modes of the ST7 offer both power and flexibility to software developers, enabling the design of highly efficient and compact application code. In addition to standard 8-bit data management, all ST7 microcontrollers feature true bit manipulation, 8x8 unsigned multiplication and indirect addressing modes.

The devices feature an on-chip Debug Module (DM) to support in-circuit debugging (ICD). For a description of the DM registers, refer to the ST7ICC Protocol Reference Manual.

Features	ST7MC1K2 ST7MC1K4				ST7MC2S4 ST7MC2S6 ST7MC2S7ST7MC2R6 ST7MC2R7 ST7MC2M9
Program memory - bytes	8K		16K	32K	16K	32K	48K	64K
RAM (stack) - bytes	384 (256)		768 (256)	1024 (256)	768 (256)	1024 (256)	1536 (256)
Peripherals	Watchdog, 16-bit Timer A, LINSCI?, 10-bit ADC, MTC, 8-bit PWM ART, ICD
					SPI, 16-bit Timer B
Operating Supply vs. Frequency	4.5 to 5.5V with fCPU≤8MHz
Package	-40°C to +85°C /-40°C to +125°C	-40°C to +85°C		-40°C to +125°C	-40°C to +85°C -40°C to +125°C	-40°C to +85 °C
Package	LQFP32	SDIP32 LQFP32			LQFP44	SDIP561)/LQFP64	LQFP64/44	LQFP80

ST7MC1K4 订购型号:

Ordering Model

Package

RoHS Compliance Grade

Marketing Status

Pin Count

Program Memory Type

Internal ROM Size

Internal RAM Size

A/D Converter

12 or 16-bit timer (IC/OC/PWM)

8-bit timer (IC/OC/PWM)

Serial Interface

I/Os (High Current)

Supply Voltage(Vcc)

Supply Voltage(Vcc)

Other Functions

Operating Temperature

Operating Temperature

Packing Type

nom

nom

nom

min

max

min

max

kB

B

V

V

°C

°C

ST7FLITE49K2B6

PDIP 32 .4 Cu .25 Shrink

Ecopack2

Active

32

FLASH

8

384

10x10-bit

2x12-bit (1/4/4), 1x16-bit (2/2/2)

2x8-bit(1/0/0)

SPI, I²C

24(8)

2.4

5.5

8MHz internal RC oscillator, ART with deadtime and enhanced one pulse mode, AWU, ROP, ICP, IAP, debug module

-40

125

Tube

ST7FLITE49K2T6

LQFP 32 7x7x1.4 1

Ecopack2

Active

32

FLASH

8

384

10x10-bit

2x12-bit (1/4/4), 1x16-bit (2/2/2)

2x8-bit(1/0/0)

SPI, I²C

24(8)

2.4

5.5

8MHz internal RC oscillator, ART with deadtime and enhanced one pulse mode, AWU, ROP, ICP, IAP, debug module

-40

125

Tray

ST7FLITE49K2T6TR

LQFP 32 7x7x1.4 1

Ecopack2

Active

32

FLASH

8

384

10x10-bit

2x12-bit (1/4/4), 1x16-bit (2/2/2)

2x8-bit(1/0/0)

SPI, I²C

24(8)

2.4

5.5

8MHz internal RC oscillator, ART with deadtime and enhanced one pulse mode, AWU, ROP, ICP, IAP, debug module

-40

125

Tape And Reel

ST7MC1K4 产品特点

• Memories
  – 8K to 60K dual voltage FLASH Program memory or ROM with read-out protection capability, In-Application Programming and In-Circuit Programming.
  – 384 to 1.5K RAM
  – HDFlash endurance: 100 cycles, data retention:40 years at 85°C
• Clock, reset and supply management
  – Enhanced reset system
  – Enhanced low voltage supervisor (LVD) for main supply and auxiliary voltage detector (AVD) with interrupt capability
  – Clock sources: crystal/ceramic resonator oscillators and by-pass for external clock, clock security system.
  – Four power saving modes: Halt, Active-Halt,Wait and Slow
• Interrupt management
  – Nested interrupt controller
  – 14 interrupt vectors plus TRAP and RESET
  – MCES top level interrupt pin
  – 16 external interrupt lines (on 3 vectors)
• Up to 60 I/O ports
  – up to 60 multifunctional bidirectional I/O lines
  – up to 41 alternate function lines
  – up to 12 high sink outputs
• 5 Timers
  – Main Clock Controller with: Real time base,Beep and Clock-out capabilities
  – Configurable window watchdog timer
  – Two 16-bit timers with: 2 input captures, 2 output compares, external clock input, PWM and pulse generator modes
  – 8-bit PWM Auto-Reload timer with: 2 input captures, 4 PWM outputs, output compare and time base interrupt, external clock with event detector
• 2 Communication interfaces
  – SPI synchronous serial interface
  – LINSCI? asynchronous serial interface
• Brushless motor control peripheral
  – 6 high sink PWM output channels for sinewaveor trapezoidal inverter control
  – Motor safety including asynchronous emergency stop and write-once registers
  – 4 analog inputs for rotor position detection (sensorless/hall/tacho/encoder)
  – Permanent magnet motor coprocessor including multiplier, programmable filters, blanking windows and event counters
  – Operational amplifier and comparator for current/ voltage mode regulation and limitation
• Analog peripheral
  – 10-bit ADC with 16 input pins
• In-circuit Debug
• Instruction set
  – 8-bit Data Manipulation
  – 63 Basic Instructions with illegal opcode detection
  – 17 main Addressing Modes
  – 8 x 8 Unsigned Multiply Instruction
  – True Bit Manipulation
• Development tools
  – Full hardware/software development package

ST7MC1K4 技术支持与电子电路设计开发资源下载

1. ST7MC1K4 数据手册 DataSheet 下载.pdf
2. 《新闻报道 》低成本开发工具能够调试ST7、μPSD和STR7微控制器的应用程序
3. 采用闪存技术的新型8位微控制器及其应用 .DOC(编号:000)