X9C103ST1C7975
# of Devices/ Channels |
1 |
# of Taps |
100 |
Memory Type |
Non-Volatile |
Bus Interface Type |
3-Wire |
Resistance Options (kΩ) |
10 |
VCC Range (V) |
4.5 to 5.5 |
VCC (min) (V) |
4.5 |
VCC (max) (V) |
5.5 |
DCP Dual Supply Range (V) |
N/A |
DCP Single Supply Range (V) |
|
Resistance Taper |
Linear |
Wiper Current (mA) |
4.4 |
Wiper Resistance (Ω) |
40 |
Supply Current (μA) |
750 |
Max Operating Temp (°C) |
85 |
End-to-End Tempco (ppm/°C) |
300 |
Middlepoint Ratiometric Tempco |
20 |
VL min. terminal voltage (V) |
-5.5 |
VH max. terminal voltage (V) |
5.5 |
The X9Cxxx are Intersil digitally controlled (xDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a three-wire interface.
The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation.
The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications including:
- control
- parameter adjustments
- signal processing
X9C103ST1C7975 产品特性
- Solid-state potentiometer
- 3-wire serial interface
- 100 wiper tap points
- Wiper position stored in nonvolatile memory and recalled on power-up
- 99 resistive elements
- Temperature compensated
- End to end resistance, ±20%
- Terminal voltages, ±5V
- Low power CMOS
- VCC = 5V
- Active current, 3mA max.
- Standby current, 750μA max.
- High reliability
- Endurance, 100,000 data changes per bit
- Register data retention, 100 years
- X9C102 = 1kΩ
- X9C103 = 10kΩ
- X9C503 = 50kΩ
- X9C104 = 100kΩ
- Packages
- Pb-free plus anneal available (RoHS compliant)
X9C103ST1C7975 芯片订购指南
X9C103ST1C7975 应用技术支持与电子电路设计开发资源下载
- X9C103ST1C7975 数据资料 datatSheet 下载.PDF
- Amplifier 放大器产品选型指南 . pdf
- ATE 系列产品选型指南 . pdf
- Auto 汽车电子选型指南 . pdf
- Communication 通信电路产品选型指南 . pdf
- Computing Power Management Products 计算机电源管理选型指南 . pdf
- DataConversion 数据转换器产品选型指南 . pdf
- DCP 数字电位器产品选型指南 . pdf
- Digital 数字电路产品选型指南 . pdf
- Display 显示器电路产品选型指南 . pdf
- Intel 英特尔嵌入式IC 应用解决方案 . pdf
- XILINX 赛灵思FPGA 应用解决方案 . pdf
- Interface 接口电路产品选型指南 . pdf
- Military 军事产品选型指南 . pdf
- Military /Space 军事/ 太空产品选型指南 . pdf
- Ordering Nomenclature Intersil 英特矽尔/ Xicor产品命名规则 . pdf
- pinPoint 系列产品选型指南 . pdf
- Power 电源管理器件产品选型指南 . pdf
- Special /Analog 特殊模拟器件产品选型指南 . pdf
- Switches/MUXes/Crosspoints 开关/ 多路复用器/ 交叉点开关产品选型指南 . pdf
- Timing /Circuits 定时电路产品选型指南 . pdf
- Video 视频产品选型指南 . pdf
- Voltage /Reference 电压基准产品选型指南 . pdf