X93254

The Intersil X93254 is a dual digitally controlled potentiometer (xDCP). The device consists of two resistor arrays, wiper switches, a control section, and nonvolatile memory. The wiper positions are controlled by individual Up/Down interfaces.

A potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. The position of each wiper element is controlled by a set of independent CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation.

Each potentiometer is connected as a two-terminal variable resistor and can be used in a wide variety of applications including:

• Bias and Gain control
• LCD Contrast Adjustment

X93254 产品特性

• Dual solid-state potentiometers
• Independent Up/Down interfaces
• 32 wiper tap points per potentiometer
  • Wiper position stored in nonvolatile memory and recalled on power-up
• 31 resistive elements per potentiometer
  • Temperature compensated
  • Maximum resistance tolerance of ± 30%
  • Terminal voltage, 0 to VCC
• Low power CMOS
  • VCC = 3V±10%
  • Active current, 250uA max
  • Standby current, 1uA max
• High reliability
  • Endurance 200,000 data changes per bit
  • Register data retention, 100 years
• RTOTAL value = 50kΩ
• 14 lead TSSOP package

X93254 芯片订购指南

芯片型号	产品状态	温度范围	封装尺寸图	潮湿敏感度等级MSL	美元价格US $
X93254UV14I-3	量产	工业级	14 Ld TSSOP	1	0.99
XLABVIEW01	量产			N/A	91.77
XLABVIEW01Z	量产		评估板	N/A	91.77

X93254 应用技术支持与电子电路设计开发资源下载

1. X93254 数据资料 datatSheet 下载.PDF