The Intersil ISL95710 is a digitally controlled potentiometer (xDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a Up/Down interface.
The potentiometer is implemented by a resistor array composed of 127 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation.
The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications including:
芯片型号 | 产品状态 | 温度范围 | 封装尺寸图 | 潮湿敏感度等级MSL | 美元价格US $ |
ISL95710UIU10Z | 量产 | 工业级 | 10 Ld MSOP | 1 | 0.99 |
ISL95710UIU10Z-T | 量产 | 工业级 | 10 Ld MSOP T+R | 1 | 0.99 |
ISL95710WIU10Z | 量产 | 工业级 | 10 Ld MSOP | 1 | 0.99 |
ISL95710WIU10Z-T | 量产 | 工业级 | 10 Ld MSOP T+R | 1 | 0.99 |
ISL95710UIP14 | 停产 | 工业级 | 14 Ld PDIP | N/A | |
ISL95710UIP14Z | 停产 | 工业级 | 14 Ld PDIP | N/A | |
ISL95710UIU10 | 停产 | 工业级 | 10 Ld MSOP | ||
ISL95710UIU10-T | 停产 | 工业级 | 10 Ld MSOP T+R | ||
ISL95710WIP14 | 停产 | 工业级 | 14 Ld PDIP | N/A | |
ISL95710WIU10 | 停产 | 工业级 | 10 Ld MSOP | ||
ISL95710WIU10-T | 停产 | 工业级 | 10 Ld MSOP T+R |