ISL9208

The ISL9208 is an overcurrent protection device and analog front end for a microcontroller in a multi-cell Li-ion battery pack. The ISL9208 supports battery pack configurations consisting of 5-cells to 7-cells in series and 1 or more cells in parallel. The ISL9208 provides integral overcurrent protection circuitry, short circuit protection, an internal 3.3V voltage regulator, internal cell balancing switches, cell voltage monitor level shifters, and drive circuitry for external FET devices for control of pack charge and discharge.

Selectable overcurrent and short circuit thresholds reside in internal RAM registers. An external microcontroller sets the thresholds by setting register values through an I2C serial interface. Internal registers also contain the detection delays for overcurrent and short circuit conditions.

Using an internal analog multiplexer the ISL9208 provides monitoring of each cell voltage plus internal and external temperature by a separate microcontroller with an A/D converter. Software on this microcontroller implements all battery pack control functionality, except for overcurrent and short circuit shutdown.

ISL9208 特点

• Software selectable overcurrent protection levels and variable protect detection times
  • 4 discharge overcurrent thresholds
  • 4 short circuit thresholds
  • 4 charge overcurrent thresholds
  • 8 overcurrent delay times (Charge)
  • 8 overcurrent delay times (Discharge)
  • 2 short circuit delay times (Discharge)
• Automatic FET turn-off and cell balance disable on reaching external (battery) or internal (IC) temperature limit.
• Automatic override of cell balance on reaching internal (IC) temperature limit.
• Fast short circuit pack shutdown
• Can use current sense resistor, FET rDS(ON), or Sense FET for overcurrent detection.
• Four battery backed software controlled flags.
• Allows three different FET controls:
  • Back-to-back N-Channel FETs for charge and discharge control
  • Single N-Channel discharge FET.
  • Single N-Channel FET for discharge, with separate, optional (smaller) back-to-back N-channel FETs for charge.
• Integrated Charge/Discharge FET Drive Circuitry with 200μA (typ) turn-on current and 150mA (typ) Discharge FET turn-off current.
• 10% Accurate 3.3V voltage regulator (minimum 25mA out with external NPN transistor having current gain of 70).
• Monitored cell voltage output stable in 100μs.
• Internal Cell balancing FETs handle up to 200mA of balancing current for each cell (with the number of cells being balanced limited by the maximum package power dissipation of 400mW).
• Simple I2C host interface
• Sleep operation with programmable negative edge or positive edge wake-up.
• <10μA Sleep Mode
• Pb-free (RoHS compliant)

ISL9208 应用

• Power Tools
• Battery Backup Systems
• E-Bikes
• Portable Test Equipment
• Medical Systems
• Hybrid Vehicle
• Military Electronics

ISL9208 芯片订购指南

芯片型号	产品状态	温度范围	封装尺寸图	潮湿敏感度等级MSL	美元价格US $
ISL9208EVAL2Z	量产		评估板	N/A	价格录入中
ISL9208IRZ	量产	工业级	32 Ld QFN	2	0.89
ISL9208IRZ-T	量产	工业级	32 Ld QFN T+R	2	0.89
ISL9208EVAL1	停产		评估板	N/A	N/A
ISL9208EVAL1Z	停产		评估板	N/A	N/A
ISLI2C-KIT	停产		评估板	N/A	N/A

ISL9208 应用技术支持与电子电路设计开发资源下载

1. ISL9208 数据资料 datatSheet 下载.PDF
2. Power 电源管理器件产品选型指南 . pdf