| # of Outputs | 3 |
| VIN (min) (V) | 5 |
| VIN (max) (V) | 25 |
| VOUT (min) (V) | 0.6 |
| VOUT (max) (V) | 22 |
| IOUT (max) (A) | 1 |
| Peak Efficiency (%) | 95 |
The ISL8501 is a high-performance, triple output controller that provides a single, high frequency power solution for a variety of point of load applications. The ISL8501 integrates a 1A standard buck PWM controller and switching MOSFET with two 500mA LDOs.
The PWM controller in the ISL8501 drives an internal switching N-Channel power MOSFET and requires an external Schottky diode to generate an output voltage from 0.6V to 20V. The integrated power switch is optimized for excellent thermal performance up to 1A of output current. The standard buck input voltage range supports a fixed 5V or variable 6V to 25V range. The PWM regulator switches at a fixed frequency of 500kHz and utilizes simple voltage mode control with input voltage feed forward to provide flexibility in component selection and minimize solution size. Protection features include overcurrent, undervoltage, and thermal overload protection integrated into the IC. The ISL8501 power good signal output indicates loss of regulation on the PWM output.
The ISL8501 features two adjustable LDO regulators using internal PMOS transistors as pass devices. Separate enable pins (EN_LDO1, EN_LDO2) control each LDO output. A single power good signal output indicates loss of regulation on either of the two LDO outputs. Independent overcurrent and thermal fault shutdown monitors are integrated into the LDO section.
ISL8501 is available in a small 4mmx4mm Quad Flat No- Lead (QFN) package.
| 芯片型号 | 产品状态 | 温度范围 | 封装尺寸图 | 潮湿敏感度等级MSL | 美元价格US $ |
| ISL8501EVAL1Z | 量产 | 评估板 | N/A | ||
| ISL8501IRZ | 量产 | 工业级 | 24 Ld QFN | 3 | |
| ISL8501IRZ-T | 量产 | 工业级 | 24 Ld QFN T+R | 3 |