首页 > Intersil 英特矽尔 > 汽车用集成电路 > LNB 控制器

ISL6423B

The ISL6423B is a highly integrated voltage regulator and interface IC, specifically designed for supplying power and control signals from advanced satellite set-top box (STB) modules to the low noise blocks (LNBs) of singe antenna ports. The device consists of a current-mode boost PWM and a low-noise linear regulator along with the circuitry required for 22kHz tone generation, modulation and I2C device interface. The device makes the total LNB supply design simple, efficient and compact with low external component count.

The current-mode boost converters provides the linear regulator with input voltage that is set to the final output voltages, plus typically 0.8V to insure minimum power dissipation across each linear regulator. This maintains constant voltage drop across the linear pass element while permitting adequate voltage range for tone injection.

The final regulated output voltage is available at output terminals to support the operation of an antenna port for single tuners. The outputs for each PWM can be controlled in two ways, full control from I2C using the VTOP and VBOT bits or set the I2C to the lower range i.e., 13V/14V, and switch to higher range i.e., 18V/19V, with the SELVTOP pin. All the functions on this IC are controlled via the I2C bus by writing 8 bits words onto the System Registers (SR). The same register can be read back, and five I2C bits will report the diagnostic status. Separate enable command sent on the I2C bus provides for standby mode control for the PWM and linear combination, disabling the output and forcing a shutdown mode. The output channel is capable of providing 750mA of continuous current. The overcurrent limit can be digitally programmed to four levels.

The External modulation input EXTM can accept a modulated Diseqc command and transfer it symmetrically to the output. Alternatively the EXTM pin can be used to modulate the continuos internal tone.

The FLT pin serves as an interrupt for the processor when any condition turns OFF the LNB controller (Over Temperature, Overcurrent, Disabled). The nature of the Disable can be read of the I2C registers.

Applications
ISL6423B 特点
ISL6423B 芯片订购指南
芯片型号 产品状态 温度范围 封装尺寸图
ISL6423BERZ 量产 Extended Comm 24 Ld QFN
ISL6423BERZ-T 量产 Extended Comm 24 Ld QFN T+R
ISL6423BEVEZ 量产 Extended Comm 28 Ld EPTSSOP
ISL6423BEVEZ-T 量产 Extended Comm 28 Ld EPTSSOP T+R
ISL6423BEVAL1Z Coming Soon 评估板
ISL6423BEVAL2Z Coming Soon 评估板
ISL6423B 应用技术支持与电子电路设计开发资源下载
  1. ISL6423B 数据资料 datatSheet 下载.PDF
  2. Amplifier 放大器产品选型指南 . pdf
  3. ATE 系列产品选型指南 . pdf
  4. Auto 汽车电子选型指南 . pdf
  5. Communication 通信电路产品选型指南 . pdf
  6. Computing Power Management Products 计算机电源管理选型指南 . pdf
  7. DataConversion 数据转换器产品选型指南 . pdf
  8. DCP 数字电位器产品选型指南 . pdf
  9. Digital 数字电路产品选型指南 . pdf
  10. Display 显示器电路产品选型指南 . pdf
  11. Intel 英特尔嵌入式IC 应用解决方案 . pdf
  12. XILINX 赛灵思FPGA 应用解决方案 . pdf
  13. Interface 接口电路产品选型指南 . pdf
  14. Military 军事产品选型指南 . pdf
  15. Military /Space 军事/ 太空产品选型指南 . pdf
  16. Ordering Nomenclature Intersil 英特矽尔/ Xicor产品命名规则 . pdf
  17. pinPoint 系列产品选型指南 . pdf
  18. Power 电源管理器件产品选型指南 . pdf
  19. Special /Analog 特殊模拟器件产品选型指南 . pdf
  20. Switches/MUXes/Crosspoints 开关/ 多路复用器/ 交叉点开关产品选型指南 . pdf
  21. Timing /Circuits 定时电路产品选型指南 . pdf
  22. Video 视频产品选型指南 . pdf
  23. Voltage /Reference 电压基准产品选型指南 . pdf