The Intersil ISL54054 and ISL54055 devices consist of low ON-resistance, low voltage, bi-directional SPST analog switches designed to operate from a single +1.8V to +5.5V supply. These devices have an unique architecture. They have two signal pins (pin 1 and pin 3) that are simultaneously connected or disconnected to a common pin (pin 4) under the control of a single logic control pin (pin 6). The ISL54054 switches are OFF when the logic is low and ON when the logic is high. The ISL54055 switches are ON when the logic is low and OFF when the logic is high. This architecture allows these devices to be used as a single SPST switch or as a distribution switch to distribute a single source to two different loads.
SPST operation is achieved by using one of the signal pins while floating the other signal pin or by externally connecting the two signal pins together. When both signal pins are tied together, the rON of the SPST is reduced by half, from 1Ω to 0.5Ω (when operated with a 5V supply).
Targeted applications include battery powered equipment that benefit from low rON resistance, excellent rON flatness, and fast switching speeds (tON = 12ns, tOFF = 12ns). The digital logic input is 1.8V logic compatible when using a single 2.7V to +3.6V supply and TTL compatible when the supply is > +3.6V.
The ISL54054 is offered in a 6 Ld 1.2mmx1.0mmx0.5mm μTDFN and 6 Ld SOT-23 packages. The ISL54055 is offered in a 6 Ld 1.2mmx1.0mmx0.5mm μTDFN, alleviating board space limitations.
The ISL54054 has two normally open (NO) switches and the ISL54055 has two normally closed (NC) switches.
| 芯片型号 | 产品状态 | 温度范围 | 封装尺寸图 | 潮湿敏感度等级MSL | 美元价格US $ |
| ISL54055IRUZ-T | 量产 | 工业级 | 6 Ld uTDFN T+R | 1 | 1.27 |