The VCOM voltage of an LCD panel needs to be adjusted to remove flicker. The ISL45042 can be used to digitally adjust a panel's VCOM voltage by controlling its output sink current. The output of the ISL45042 is connected to an external voltage divider and an external VCOM buffer amplifier. In this application, the user can control the VCOM voltage with 7-Bit accuracy (128 steps). Once the desired VCOM setting is obtained, the settings can be stored in the non-volatile EEPROM memory, which would then be automatically recalled during every power-up.
The VCOM adjustment and non-volatile memory programming is through a single interface pin (CTL). Once the desired programmed value is obtained, the Counter Enable pin (CE) can be used to prevent further adjustment or programming.
The full-scale sink current of the ISL45042 is set using an external resister connected to the SET pin. The full-scale sink current determines the lowest voltage of the external voltage divider.
The ISL45042 is available in an 8 Ld 3mmx3mm TDFN package with a maximum thickness of 0.8mm for ultra thin LCD panel design.
| 芯片型号 | 产品状态 | 温度范围 | 封装尺寸图 | 潮湿敏感度等级MSL | 美元价格US $ |
| ISL45042EVAL1 | 量产 | 评估板 | N/A | ||
| ISL45042EVAL1Z | 量产 | 评估板 | N/A | ||
| ISL45042IRZ | 量产 | 工业级 | 8 Ld TDFN | 2 | |
| ISL45042IRZ-T | 量产 | 工业级 | 8 Ld TDFN T+R | 2 | |
| ISL45042IRZ-TK | 量产 | 工业级 | 8 Ld TDFN T+R | 2 | |
| ISL45042IR | 停产 | 工业级 | 8 Ld TDFN | 1 | N/A |
| ISL45042IR-T | 停产 | 工业级 | 8 Ld TDFN T+R | 1 | N/A |