ISL22349 四重数控电位器（数字电位器TM）

The ISL22349 integrates four digitally controlled potentiometers (DCP) and non-volatile memory on a monolithic CMOS integrated circuit.

The digitally controlled potentiometers are implemented with a combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the I2C bus interface. Each potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR) that can be directly written to and read by the user. The contents of the WR controls the position of the wiper. At power up the device recalls the contents of the two DCP’s IVR to the corresponding WRs.

The DCPs can be used as a voltage divider in a wide variety of applications including control, parameter adjustments, AC measurement and signal processing.

ISL22349 特性

• Four potentiometers in one package
• 128 resistor taps
• I2C serial interface
  • Three address pins, up to eight devices/bus
• Non-volatile storage of wiper position
• Wiper resistance: 70Ω typical
• Shutdown mode
• Shutdown current 6.5μA max
• Power supply: 2.7V to 5.5V
• 50kΩ or 10kΩ total resistance
• High reliability
  • Endurance: 1,000,000 data changes per bit per register
  • Register data retention: 50 years @ T ≤ +55°C
• 14 Ld TSSOP
• Pb-free plus anneal product (RoHS compliant)

ISL22349 芯片订购指南

芯片型号	产品状态	温度范围	封装尺寸图	潮湿敏感度等级MSL	美元价格US $
ISL22349UFV14Z	量产	工业级	14 Ld TSSOP	1	2.57
ISL22349UFV14Z-TK	量产	工业级	14 Ld TSSOP T+R	1	2.57
ISL22349WFV14Z	量产	工业级	14 Ld TSSOP	1	2.57
ISL22349WFV14Z-TK	量产	工业级	14 Ld TSSOP T+R	1	2.57

ISL22349 应用技术支持与电子电路设计开发资源下载

1. ISL22349 数据资料 datatSheet 下载.PDF